<< Chapter < Page Chapter >> Page >

Two 10 k Ω resistors are connected in series. Calculate the equivalent resistance.

  1. Since the resistors are in series we can use:

    R s = R 1 + R 2
  2. R s = R 1 + R 2 = 10 k Ω + 10 k Ω = 20 k Ω
  3. The equivalent resistance of two 10 k Ω resistors connected in series is 20 k Ω .

Two resistors are connected in series. The equivalent resistance is 100 Ω . If one resistor is 10 Ω , calculate the value of the second resistor.

  1. Since the resistors are in series we can use:

    R s = R 1 + R 2

    We are given the value of R s and R 1 .

  2. R s = R 1 + R 2 R 2 = R s - R 1 = 100 Ω - 10 Ω = 90 Ω
  3. The second resistor has a resistance of 90 Ω .

Khan academy video on circuits - 2

Resistors in parallel

In contrast to the series case, when we add resistors in parallel, we create more paths along which current can flow. By doing this we decrease the total resistance of the circuit!

Take a look at the diagram below. On the left we have the same circuit as shown on the left in [link] with a battery and a resistor. The ammeter shows a current of 1 ampere. On the right we have added a second resistor in parallel to the first resistor. This has increased the number of paths (branches) the charge can take through the circuit - the total resistance has decreased. You can see that the current in the circuit has increased. Also notice that the current in the different branches can be different (in this case 1 A and 2 A) but must add up to the current through the battery (3 A). Since the total current in the circuit is equal to the sum of the currents in the parallel branches, a parallel circuit is sometimes called a current divider .

Potential difference and parallel resistors

When resistors are connected in parallel the start and end points for all the resistors are the same. These points have the same potential energy and so the potential difference between them is the same no matter what is put in between them. You can have one, two or many resistors between the two points, the potential difference will not change. You can ignore whatever components are between two points in a circuit when calculating the difference between the two points.

Look at the following circuit diagrams. The battery is the same in all cases. All that changes is that more resistors are added between the points marked by the black dots. If we were to measure the potential difference between the two dots in these circuits we would get the same answer for all three cases.

Let's look at two resistors in parallel more closely. When you construct a circuit you use wires and you might think that measuring the voltage in different places on the wires will make a difference. This is not true. The potential difference or voltage measurement will only be different if you measure a different set of components. All points on the wires that have no circuit components between them will give you the same measurements.

All three of the measurements shown in the picture below (i.e. A–B, C–D and E–F) will give you the same voltage. The different measurement points on the left (i.e. A, E, C) have no components between them so there is no change in potential energy. Exactly the same applies to the different points on the right (i.e. B, F, D). When you measure the potential difference between the points on the left and right you will get the same answer.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Physics - grade 10 [caps 2011]. OpenStax CNX. Jun 14, 2011 Download for free at http://cnx.org/content/col11298/1.3
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Physics - grade 10 [caps 2011]' conversation and receive update notifications?

Ask