<< Chapter < Page Chapter >> Page >
An introductory module to the theory and application of Carbon Analysis: discusses techniques used to measure Total Organic Carbon, Total Inorganic Carbon, and Total Carbon, and the importance of such techniques.

Introduction

Carbon is one of the more abundant elements on the planet; all living things and many non-living things have some form of carbon in them. Having the ability to measure and characterize the carbon content of a sample is of extreme value in a variety of different industries and research environments.

Total carbon (TC) content is just one important piece of information that is needed by analysts concerned with the carbon content of a sample. Having the knowledge of the origin of carbon in the sample, whether it be derived from organic or inorganic material, is also of extreme importance. For example, oil companies are interested in finding petroleum, a carbon containing material derived from organic matter, knowing the carbon content and the type of carbon in a sample of interest can mean the difference between investing millions of dollars and not doing so. Regulatory agencies like the U.S. Environmental Protection Agency (EPA) is another such example, where regulation of the carbon content and character of that carbon is essential for environmental and human health.

Considering the importance of identifying and quantifying the carbon content of an analyte, it may be surprising to learn that there is no one method to measure the carbon content of a sample. Unlike other techniques, no fancy instrument is required (although some exists that can be useful). In fact, methods to measure the different forms of carbon (organic or inorganic) are different themselves because they take advantage of the different properties characteristics to the carbon content you are measuring, in fact you will most likely use multiple techniques to fully characterize the carbon content of a sample, not just one.

Measurements of carbon content are related, and therefore measurement of either total carbon content (TC), total inorganic carbon content (TIC) and total organic carbon content (TOC) is related to the other two by [link] .

This means that measurement of two variables can indirectly give you the third, as there are only two classes of carbon: organic carbon and inorganic carbon.

Herein several of the methods used in measuring the TOC, TIC and TC for samples will be outlined. Not all samples require the same kind of instruments and methods. The goal of this module is to get the reader to see the simplicity of some of these methods and understand the need for such quantification and analysis.

Measurement of total organic carbon (toc)

Sample and sample preparation

The total organic carbon content for a variety of different samples can be determined; there are very few samples that cannot be measured for total carbon content. Before treatment, a sample must be homogenized, whereby a sample is mixed or broken such that a measurement done on the sample can be representative of the entire sample. For example, if our sample were a rock, we would want to make sure that the inner core of the rock, which could have a different composition than the outer surface, were being measured as well. Not homogenizing the sample would lead to inconsistent and perhaps irreproducable results. Techniques for homogenization vary wildly, depending on the sample, different techniques exist.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Physical methods in chemistry and nano science. OpenStax CNX. May 05, 2015 Download for free at http://legacy.cnx.org/content/col10699/1.21
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Physical methods in chemistry and nano science' conversation and receive update notifications?

Ask