<< Chapter < Page Chapter >> Page >

Introduction

One of the problems associated with testing a new unproven photovoltaic material or cell design is that significant processing required in order to create a fully functioning solar cell. If it is desired to screen a wide range of materials or synthetic conditions it can be time consuming (and costly of research funds) to prepare fully functioning devices. In addition, the success of each individual cell may be more dependent on fabrication steps not associated with the variations under study. For example, lithography and metallization could cause more variability than the parameters of the materials synthesis. Thus, the result could be to give no useful information as to the viability of each material under study, or even worse a false indication of research direction.

So-called quick and dirty qualitative measurements can be employed to assess not only the relative photoresponse of new absorber layer materials, but also the relative power output of photovoltaic devices. The measurement procedure can provide a simple, inexpensive and rapid evaluation of cell materials and structures that can help guide the development of new materials for solar cell applications.

Equipment needs

Everything needed for the measurements can be purchased at a local electronics store and a hardware or big box store. Needed items are:

  • Two handheld digital voltmeter with at least ±0.01 mV sensitivity (0.001 mV is better, of course).
  • A simple breadboard and associated wiring kit.
  • A selection of standard size and wattage resistors ( 1 / 8 - 1 Watt, 1 - 1000 ohms).
  • A selection of wire wound potentiometers (0 - 10 ohms; 0 - 100 ohms; 0 - 1000 ohms) if I-V tracing is desired.
  • A light source. This can be anything from a simple flood light to an old slide projector.
  • A small fan or other cooling device for “steady state” (i.e., for measurements that last more than a few seconds such as tracing an I-V curve).
  • 9 volt battery and holder or simple ac/dc low voltage power supply.

Measurement of the photo-response of an experimental solar cell

A qualitative measurement of a solar cell’s current-voltage (I-V) characteristics can be obtained using the simple circuit diagram illustrated in [link] . [link] shows an I-V test setup using a household flood lamp for the light source. A small fan sits to the right just out of the picture.

Simple circuit diagram for I-V measurement of a prototype solar cell.
Simple test apparatus for qualitative measurement of the current-voltage output from an experimental thin film solar cell.

Driving the potentiometer to its maximum value will place the cell close to open circuit operation, depending on the potentiometer range, so that the open circuit voltage can be simply extrapolated from the I versus V curve. If desired, the circuit can simply be opened to make the actual measurement once the rest of the data have been recorded. Data in this case were simply recorded by hand and later entered into a spreadsheet so an I-V plot could be generated. A sample plot is shown in [link] . Keep in mind that cell efficiency cannot be determined with this technique unless the light source has been calibrated and color corrected to match terrestrial sunlight. The fact that the experimental device actually generated net power was the result sought. The shape of the curve and the very low voltage are the result of very large resistive losses in the device along with a very “leaky” junction.

Questions & Answers

what is mutation
Janga Reply
what is a cell
Sifune Reply
how is urine form
Sifune
what is antagonism?
mahase Reply
classification of plants, gymnosperm features.
Linsy Reply
what is the features of gymnosperm
Linsy
how many types of solid did we have
Samuel Reply
what is an ionic bond
Samuel
What is Atoms
Daprince Reply
what is fallopian tube
Merolyn
what is bladder
Merolyn
what's bulbourethral gland
Eduek Reply
urine is formed in the nephron of the renal medulla in the kidney. It starts from filtration, then selective reabsorption and finally secretion
onuoha Reply
State the evolution relation and relevance between endoplasmic reticulum and cytoskeleton as it relates to cell.
Jeremiah
what is heart
Konadu Reply
how is urine formed in human
Konadu
how is urine formed in human
Rahma
what is the diference between a cavity and a canal
Pelagie Reply
what is the causative agent of malaria
Diamond
malaria is caused by an insect called mosquito.
Naomi
Malaria is cause by female anopheles mosquito
Isaac
Malaria is caused by plasmodium Female anopheles mosquitoe is d carrier
Olalekan
a canal is more needed in a root but a cavity is a bad effect
Commander
what are pathogens
Don Reply
In biology, a pathogen (Greek: πάθος pathos "suffering", "passion" and -γενής -genēs "producer of") in the oldest and broadest sense, is anything that can produce disease. A pathogen may also be referred to as an infectious agent, or simply a germ. The term pathogen came into use in the 1880s.[1][2
Zainab
A virus
Commander
Definition of respiration
Muhsin Reply
respiration is the process in which we breath in oxygen and breath out carbon dioxide
Achor
how are lungs work
Commander
where does digestion begins
Achiri Reply
in the mouth
EZEKIEL
what are the functions of follicle stimulating harmones?
Rashima Reply
stimulates the follicle to release the mature ovum into the oviduct
Davonte
what are the functions of Endocrine and pituitary gland
Chinaza
endocrine secrete hormone and regulate body process
Achor
while pituitary gland is an example of endocrine system and it's found in the Brain
Achor
what's biology?
Egbodo Reply
Biology is the study of living organisms, divided into many specialized field that cover their morphology, physiology,anatomy, behaviour,origin and distribution.
Lisah
biology is the study of life.
Alfreda
Biology is the study of how living organisms live and survive in a specific environment
Sifune
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Physical methods in chemistry and nano science. OpenStax CNX. May 05, 2015 Download for free at http://legacy.cnx.org/content/col10699/1.21
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Physical methods in chemistry and nano science' conversation and receive update notifications?

Ask