<< Chapter < Page Chapter >> Page >
m obj = L f obj = 16 cm f obj .

We now need to calculate the angular magnification of the eyepiece with the image at infinity. To do so, we take the ratio of the angle θ image subtended by the image to the angle θ object subtended by the object at the near point of the eye (this is the closest that the unaided eye can view the object, and thus this is the position where the object will form the largest image on the retina of the unaided eye). Using [link] and working in the small-angle approximation, we have θ image h i obj / f eye and θ object h i obj / 25 cm , where h i obj is the height of the image formed by the objective, which is the object of the eyepiece. Thus, the angular magnification of the eyepiece is

M eye = θ image θ object = h i obj f eye 25 cm h i obj = 25 cm f eye .

The net magnifying power of the compound microscope with the image at infinity is therefore

M net = m obj M eye = ( 16 cm ) ( 25 cm ) f obj f eye .

The focal distances must be in centimeters. The minus sign indicates that the final image is inverted. Note that the only variables in the equation are the focal distances of the eyepiece and the objective, which makes this equation particularly useful.

Telescopes

Telescopes are meant for viewing distant objects and produce an image that is larger than the image produced in the unaided eye. Telescopes gather far more light than the eye, allowing dim objects to be observed with greater magnification and better resolution. Telescopes were invented around 1600, and Galileo was the first to use them to study the heavens, with monumental consequences. He observed the moons of Jupiter, the craters and mountains on the moon, the details of sunspots, and the fact that the Milky Way is composed of a vast number of individual stars.

Figure a shows incoming parallel rays from the left entering a bi-convex lens labeled objective. From here, they deviate towards each other and enter a bi-concave lens labeled eyepiece, through which they reach the eye of the observer. The back extensions of the rays reaching the eye converge to the far left at the upright image of a tree, labeled final image. Figure b shows incoming rays at an angle theta to the optical axis entering a bi-convex lens labeled objective from the left of the figure. They converge on the other side at the focal point of the objective to form a tiny, inverted image of a tree. They travel further to enter a bi-convex lens labeled eyepiece. They deviate from here to enter the eye. The rays reaching the eye make an angle theta prime with the optical axis. Their back extensions converge to the far left at an enlarged, inverted image of the tree, labeled final image.
(a) Galileo made telescopes with a convex objective and a concave eyepiece. These produce an upright image and are used in spyglasses. (b) Most simple refracting telescopes have two convex lenses. The objective forms a real, inverted image at (or just within) the focal plane of the eyepiece. This image serves as the object for the eyepiece. The eyepiece forms a virtual, inverted image that is magnified.

Part (a) of [link] shows a refracting telescope made of two lenses. The first lens, called the objective    , forms a real image within the focal length of the second lens, which is called the eyepiece    . The image of the objective lens serves as the object for the eyepiece, which forms a magnified virtual image that is observed by the eye. This design is what Galileo used to observe the heavens.

Although the arrangement of the lenses in a refracting telescope looks similar to that in a microscope, there are important differences. In a telescope, the real object is far away and the intermediate image is smaller than the object. In a microscope, the real object is very close and the intermediate image is larger than the object. In both the telescope and the microscope, the eyepiece magnifies the intermediate image; in the telescope, however, this is the only magnification.

The most common two-lens telescope is shown in part (b) of the figure. The object is so far from the telescope that it is essentially at infinity compared with the focal lengths of the lenses ( d o obj ) , so the incoming rays are essentially parallel and focus on the focal plane. Thus, the first image is produced at d i obj = f obj , as shown in the figure, and is not large compared with what you might see by looking directly at the object. However, the eyepiece of the telescope eyepiece (like the microscope eyepiece) allows you to get nearer than your near point to this first image and so magnifies it (because you are near to it, it subtends a larger angle from your eye and so forms a larger image on your retina). As for a simple magnifier, the angular magnification of a telescope is the ratio of the angle subtended by the image [ θ image in part (b)] to the angle subtended by the real object [ θ object in part (b)]:

Practice Key Terms 6

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 3. OpenStax CNX. Nov 04, 2016 Download for free at http://cnx.org/content/col12067/1.4
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 3' conversation and receive update notifications?

Ask