<< Chapter < Page Chapter >> Page >

View this demonstration to see three weights that are connected by strings over pulleys and tied together in a knot. You can experiment with the weights to see how they affect the equilibrium position of the knot and, at the same time, see the vector-diagram representation of the first equilibrium condition at work.

A breaking tension

A small pan of mass 42.0 g is supported by two strings, as shown in [link] . The maximum tension that the string can support is 2.80 N. Mass is added gradually to the pan until one of the strings snaps. Which string is it? How much mass must be added for this to occur?

Figure shows small pan of mass supported by two strings intersecting at a 90 degree angle. The length of one string is 5 centimeters, the length of another string is 10 centimeters.
Mass is added gradually to the pan until one of the strings snaps.

Strategy

This mechanical system consisting of strings, masses, and the pan is in static equilibrium. Specifically, the knot that ties the strings to the pan is in static equilibrium. The knot can be treated as a point; therefore, we need only the first equilibrium condition. The three forces pulling at the knot are the tension T 1 in the 5.0-cm string, the tension T 2 in the 10.0-cm string, and the weight w of the pan holding the masses. We adopt a rectangular coordinate system with the y -axis pointing opposite to the direction of gravity and draw the free-body diagram for the knot (see [link] ). To find the tension components, we must identify the direction angles α 1 and α 2 that the strings make with the horizontal direction that is the x -axis. As you can see in [link] , the strings make two sides of a right triangle. We can use the Pythagorean theorem to solve this triangle, shown in [link] , and find the sine and cosine of the angles α 1 and α 2 . Then we can resolve the tensions into their rectangular components, substitute in the first condition for equilibrium ( [link] and [link] ), and solve for the tensions in the strings. The string with a greater tension will break first.

Top figure shows the distribution of forces for the knot that ties the strings to the pan. T1 and T2 forces are pulling at the knot upward. Weight, a sum of M and m multiplied by g is pulling the knot downward. Projections of T1 and T2 at the x and y axes are shown. Bottom figure shows the representation of the knot that ties the strings to the pan as a right triangle. It has legs of the length a and 2a with a being equal 5 centimeters. Hypotenuse is a square root of five. Angle alpha 1 is formed by shorter leg and hypotenuse. Angle alpha 2 is formed by the longer leg and hypotenuse. Cosine of angle alpha 1 is equal to sine of angle alpha 2 and is equal to one divided by square root of five. Cosine of angle alpha 2 is equal to sine of angle alpha 1 and is equal to two divided by square root of five.
Free-body diagram for the knot in [link] .

Solution

The weight w pulling on the knot is due to the mass M of the pan and mass m added to the pan, or w = ( M + m ) g . With the help of the free-body diagram in [link] , we can set up the equilibrium conditions for the knot:

in the x -direction, T 1 x + T 2 x = 0 in the y -direction, + T 1 y + T 2 y w = 0 .

From the free-body diagram, the magnitudes of components in these equations are

T 1 x = T 1 cos α 1 = T 1 / 5 , T 1 y = T 1 sin α 1 = 2 T 1 / 5 T 2 x = T 2 cos α 2 = 2 T 2 / 5 , T 2 y = T 2 sin α 2 = T 2 / 5 .

We substitute these components into the equilibrium conditions and simplify. We then obtain two equilibrium equations for the tensions:

in x -direction, T 1 = 2 T 2 in y -direction, 2 T 1 5 + T 2 5 = ( M + m ) g .

The equilibrium equation for the x -direction tells us that the tension T 1 in the 5.0-cm string is twice the tension T 2 in the 10.0-cm string. Therefore, the shorter string will snap. When we use the first equation to eliminate T 2 from the second equation, we obtain the relation between the mass m on the pan and the tension T 1 in the shorter string:

2.5 T 1 / 5 = ( M + m ) g .

The string breaks when the tension reaches the critical value of T 1 = 2.80 N . The preceding equation can be solved for the critical mass m that breaks the string:

m = 2.5 5 T 1 g M = 2.5 5 2.80 N 9.8 m / s 2 0.042 kg = 0.277 kg = 277.0 g.

Significance

Suppose that the mechanical system considered in this example is attached to a ceiling inside an elevator going up. As long as the elevator moves up at a constant speed, the result stays the same because the weight w does not change. If the elevator moves up with acceleration, the critical mass is smaller because the weight of M + m becomes larger by an apparent weight due to the acceleration of the elevator. Still, in all cases the shorter string breaks first.

Summary

  • A body is in equilibrium when it remains either in uniform motion (both translational and rotational) or at rest. When a body in a selected inertial frame of reference neither rotates nor moves in translational motion, we say the body is in static equilibrium in this frame of reference.
  • Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium. If one of them is not satisfied, the body is not in equilibrium.
  • The free-body diagram for a body is a useful tool that allows us to count correctly all contributions from all external forces and torques acting on the body. Free-body diagrams for the equilibrium of an extended rigid body must indicate a pivot point and lever arms of acting forces with respect to the pivot.

Conceptual questions

What can you say about the velocity of a moving body that is in dynamic equilibrium?

constant

Got questions? Get instant answers now!

Under what conditions can a rotating body be in equilibrium? Give an example.

Got questions? Get instant answers now!

What three factors affect the torque created by a force relative to a specific pivot point?

magnitude and direction of the force, and its lever arm

Got questions? Get instant answers now!

Mechanics sometimes put a length of pipe over the handle of a wrench when trying to remove a very tight bolt. How does this help?

Got questions? Get instant answers now!

For the next four problems, evaluate the statement as either true or false and explain your answer.

If there is only one external force (or torque) acting on an object, it cannot be in equilibrium.

True, as the sum of forces cannot be zero in this case unless the force itself is zero.

Got questions? Get instant answers now!

If an object is in equilibrium there must be an even number of forces acting on it.

Got questions? Get instant answers now!

If an odd number of forces act on an object, the object cannot be in equilibrium.

False, provided forces add to zero as vectors then equilibrium can be achieved.

Got questions? Get instant answers now!

A body moving in a circle with a constant speed is in rotational equilibrium.

Got questions? Get instant answers now!

What purpose is served by a long and flexible pole carried by wire-walkers?

It helps a wire-walker to maintain equilibrium.

Got questions? Get instant answers now!

Problems

When tightening a bolt, you push perpendicularly on a wrench with a force of 165 N at a distance of 0.140 m from the center of the bolt. How much torque are you exerting relative to the center of the bolt?

Got questions? Get instant answers now!

When opening a door, you push on it perpendicularly with a force of 55.0 N at a distance of 0.850 m from the hinges. What torque are you exerting relative to the hinges?

46.8 N · m

Got questions? Get instant answers now!

Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of the suspended body is 100.0 N and the masses of the cables are negligible.

Figure A shows small pan of mass supported by string T3 that is tied to strings T1 and T2. Strings T1 and T2 are connected to two beams intersecting at a 90 degree angle. String T1 is perpendicular to the beam it is connected to. String T2 forms a 45 degree angle with the beam it is connected to. Figure B shows small pan of mass supported by string T2 that is tied to two identical strings T1. Strings T1 form 60 degree angles with the beam they are connected to. Figure C shows small pan of mass supported by string T3 that is tied to strings T1 and T2. String T1 and T2 form 60 and 45 degree angles, respectively, with the beam they are connected to. Figure D shows small pan of mass supported by string T4 that is tied to two strings T3 forming 6o degrees angle with the string T2. String T2 is connected to the beam by two strings T1. Strings T1 form 45 degree angles with the beam.
Got questions? Get instant answers now!

What force must be applied at point P to keep the structure shown in equilibrium? The weight of the structure is negligible.

Figure shows the distribution of forces applied to point P. Force of 2000 N, two meters to the left of the point P, moves it downwards. Force of 4000 N, two meters to the right and one meter above of the point P, moves it to the right.

153.4°

Got questions? Get instant answers now!

Is it possible to apply a force at P to keep in equilibrium the structure shown? The weight of the structure is negligible.

Figure shows the distribution of forces applied to point P. Force of 2000 N, two meters to the left of the point P, moves it downwards. Force of 3000 N, two meters to the right of the point P, moves it upwards. Force of 5000 N, two meters to the right and one meter above of the point P, moves it to the right.
Got questions? Get instant answers now!

Two children push on opposite sides of a door during play. Both push horizontally and perpendicular to the door. One child pushes with a force of 17.5 N at a distance of 0.600 m from the hinges, and the second child pushes at a distance of 0.450 m. What force must the second child exert to keep the door from moving? Assume friction is negligible.

23.3 N

Got questions? Get instant answers now!

A small 1000-kg SUV has a wheel base of 3.0 m. If 60% if its weight rests on the front wheels, how far behind the front wheels is the wagon’s center of mass?

Got questions? Get instant answers now!

The uniform seesaw is balanced at its center of mass, as seen below. The smaller boy on the right has a mass of 40.0 kg. What is the mass of his friend?

Figure is a schematic drawing of two boys on the seesaw. One boy sits two meters from the edge of the seesaw and two meters from the center. Another boys sits at the opposite edge of the seesaw, four meters from the center.

80.0 kg

Got questions? Get instant answers now!
Practice Key Terms 6

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask