<< Chapter < Page Chapter >> Page >

Conceptual questions

Consider a string with under tension with a constant linear mass density. A sinusoidal wave with an angular frequency and amplitude produced by some external driving force. If the frequency of the driving force is decreased to half of the original frequency, how is the time-averaged power of the wave affected? If the amplitude of the driving force is decreased by half, how is the time-averaged power affected? Explain your answer.

The time averaged power is P = E λ T = 1 2 μ A 2 ω 2 λ T = 1 2 μ A 2 ω 2 v . If the frequency or amplitude is halved, the power decreases by a factor of 4.

Got questions? Get instant answers now!

Circular water waves decrease in amplitude as they move away from where a rock is dropped. Explain why.

Got questions? Get instant answers now!

In a transverse wave on a string, the motion of the string is perpendicular to the motion of the wave. If this is so, how is possible to move energy along the length of the string?

As a portion on the string moves vertically, it exerts a force on the neighboring portion of the string, doing work on the portion and transferring the energy.

Got questions? Get instant answers now!

The energy from the sun warms the portion of the earth facing the sun during the daylight hours. Why are the North and South Poles cold while the equator is quite warm?

Got questions? Get instant answers now!

The intensity of a spherical waves decreases as the wave moves away from the source. If the intensity of the wave at the source is I 0 , how far from the source will the intensity decrease by a factor of nine?

The intensity of a spherical wave is I = P 4 π r 2 , if no energy is dissipated the intensity will decrease by a factor of nine at three meters.

Got questions? Get instant answers now!

Problems

A string of length 5 m and a mass of 90 g is held under a tension of 100 N. A wave travels down the string that is modeled as y ( x , t ) = 0.01 m sin ( 0.40 m −1 x 1170.12 s −1 ) . What is the power over one wavelength?

v = 74.54 m/s, P λ = 91.85 W

Got questions? Get instant answers now!

Ultrasound of intensity 1.50 × 10 2 W/m 2 is produced by the rectangular head of a medical imaging device measuring 3.00 cm by 5.00 cm. What is its power output?

Got questions? Get instant answers now!

The low-frequency speaker of a stereo set has a surface area of A = 0.05 m 2 and produces 1 W of acoustical power. (a) What is the intensity at the speaker? (b) If the speaker projects sound uniformly in all directions, at what distance from the speaker is the intensity 0.1 W/m 2 ?

a. I = 20.0 W/m 2 ; b. I = P A , A = 10.0 m 2 A = 4 π r 2 , r = 0.892 m

Got questions? Get instant answers now!

To increase the intensity of a wave by a factor of 50, by what factor should the amplitude be increased?

Got questions? Get instant answers now!

A device called an insolation meter is used to measure the intensity of sunlight. It has an area of 100 cm 2 and registers 6.50 W. What is the intensity in W/m 2 ?

I = 650 W/m 2

Got questions? Get instant answers now!

Energy from the Sun arrives at the top of Earth’s atmosphere with an intensity of 1400 W/m 2 . How long does it take for 1.80 × 10 9 J to arrive on an area of 1.00 m 2 ?

Got questions? Get instant answers now!

Suppose you have a device that extracts energy from ocean breakers in direct proportion to their intensity. If the device produces 10.0 kW of power on a day when the breakers are 1.20 m high, how much will it produce when they are 0.600 m high?

P E I X 2 P 2 P 1 = ( X 2 X 1 ) 2 P 2 = 2.50 kW

Got questions? Get instant answers now!

A photovoltaic array of (solar cells) is 10.0 % efficient in gathering solar energy and converting it to electricity. If the average intensity of sunlight on one day is 70.00 W/m 2 , what area should your array have to gather energy at the rate of 100 W? (b) What is the maximum cost of the array if it must pay for itself in two years of operation averaging 10.0 hours per day? Assume that it earns money at the rate of 9.00 cents per kilowatt-hour.

Got questions? Get instant answers now!

A microphone receiving a pure sound tone feeds an oscilloscope, producing a wave on its screen. If the sound intensity is originally 2.00 × 10 −5 W/m 2 , but is turned up until the amplitude increases by 30.0 % , what is the new intensity?

I X 2 I 1 I 2 = ( X 1 X 2 ) 2 I 2 = 3.38 × 10 −5 W/m 2

Got questions? Get instant answers now!

A string with a mass of 0.30 kg has a length of 4.00 m. If the tension in the string is 50.00 N, and a sinusoidal wave with an amplitude of 2.00 cm is induced on the string, what must the frequency be for an average power of 100.00 W?

Got questions? Get instant answers now!

The power versus time for a point on a string ( μ = 0.05 kg/m ) in which a sinusoidal traveling wave is induced is shown in the preceding figure. The wave is modeled with the wave equation y ( x , t ) = A sin ( 20.93 m −1 x ω t ) . What is the frequency and amplitude of the wave?

f = 100.00 Hz , A = 1.10 cm

Got questions? Get instant answers now!

A string is under tension F T 1 . Energy is transmitted by a wave on the string at rate P 1 by a wave of frequency f 1 . What is the ratio of the new energy transmission rate P 2 to P 1 if the tension is doubled?

Got questions? Get instant answers now!

A 250-Hz tuning fork is struck and the intensity at the source is I 1 at a distance of one meter from the source. (a) What is the intensity at a distance of 4.00 m from the source? (b) How far from the tuning fork is the intensity a tenth of the intensity at the source?

a. I 2 = 0.063 I 1 ; b. I 1 4 π r 1 2 = I 2 4 π r 2 2 r 2 = 3.16 m

Got questions? Get instant answers now!

A sound speaker is rated at a voltage of P = 120.00 V and a current of I = 10.00 A . Electrical power consumption is P = I V . To test the speaker, a signal of a sine wave is applied to the speaker. Assuming that the sound wave moves as a spherical wave and that all of the energy applied to the speaker is converted to sound energy, how far from the speaker is the intensity equal to 3.82 W/m 2 ?

Got questions? Get instant answers now!

The energy of a ripple on a pond is proportional to the amplitude squared. If the amplitude of the ripple is 0.1 cm at a distance from the source of 6.00 meters, what was the amplitude at a distance of 2.00 meters from the source?

2 π r 1 A 1 2 = 2 π r 2 A 2 2 , A 1 = ( r 2 r 1 ) 1 / 2 A 1 = 0.17 m

Got questions? Get instant answers now!
Practice Key Terms 1

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask