# 18.7 Conductors and electric fields in static equilibrium  (Page 3/11)

 Page 3 / 11

To see how and why this happens, consider the charged conductor in [link] . The electrostatic repulsion of like charges is most effective in moving them apart on the flattest surface, and so they become least concentrated there. This is because the forces between identical pairs of charges at either end of the conductor are identical, but the components of the forces parallel to the surfaces are different. The component parallel to the surface is greatest on the flattest surface and, hence, more effective in moving the charge.

The same effect is produced on a conductor by an externally applied electric field, as seen in [link] (c). Since the field lines must be perpendicular to the surface, more of them are concentrated on the most curved parts.

## Applications of conductors

On a very sharply curved surface, such as shown in [link] , the charges are so concentrated at the point that the resulting electric field can be great enough to remove them from the surface. This can be useful.

Lightning rods work best when they are most pointed. The large charges created in storm clouds induce an opposite charge on a building that can result in a lightning bolt hitting the building. The induced charge is bled away continually by a lightning rod, preventing the more dramatic lightning strike.

Of course, we sometimes wish to prevent the transfer of charge rather than to facilitate it. In that case, the conductor should be very smooth and have as large a radius of curvature as possible. (See [link] .) Smooth surfaces are used on high-voltage transmission lines, for example, to avoid leakage of charge into the air.

Another device that makes use of some of these principles is a Faraday cage    . This is a metal shield that encloses a volume. All electrical charges will reside on the outside surface of this shield, and there will be no electrical field inside. A Faraday cage is used to prohibit stray electrical fields in the environment from interfering with sensitive measurements, such as the electrical signals inside a nerve cell.

During electrical storms if you are driving a car, it is best to stay inside the car as its metal body acts as a Faraday cage with zero electrical field inside. If in the vicinity of a lightning strike, its effect is felt on the outside of the car and the inside is unaffected, provided you remain totally inside. This is also true if an active (“hot”) electrical wire was broken (in a storm or an accident) and fell on your car.

Why is there no 2nd harmonic in the classical electron orbit?
how to reform magnet after been demagneted
A petrol engine has a output of 20 kilowatts and uses 4.5 kg of fuel for each hour of running. The energy given out when 1 kg of petrol is burnt is 4.8 × 10 to the power of 7 Joules. a) What is the energy output of the engine every hour? b) What is the energy input of the engine every hour?
what is the error during taking work done of a body..
what kind of error do you think? and work is held by which force?
Daniela
I am now in this group
smart
theory,laws,principles and what-a-view are not defined. why? you
A simple pendulum is used in a physics laboratory experiment to obtain an experimental value for the gravitational acceleration, g . A student measures the length of the pendulum to be 0.510 meters, displaces it 10 o from the equilibrium position, and releases it. Using a s
so what question are you passing across... sir?
Olalekan
Two masses of 2 kg and 4 kg are held with a compressed spring between them. If the masses are released, the spring will push them away from each other. If the smaller mass moves off with a velocity of 6m/s, what is the stored energy in the spring when it is compressed?
54 joule
babar
how?
rakesh
Reduce that two body problem into one body problem. Apply potential and k. E formula to get total energy of the system
rakesh
i dont think dere is any potential energy... by d virtue of no height present
Olalekan
there is compressed energy,dats only potential energy na?
rakesh
yes.. but... how will u approach that question without The Height in the question?
Olalekan
Can you explain how you get 54J?
Emmanuel
Because mine is 36J
Emmanuel
got 36J too
Douglas
OK the answer is 54J Babar is correct
Emmanuel
Conservation of Momentum
Emmanuel
woow i see.. can you give the formula for this
joshua
Two masses of 2 kg and 4 kg are held with a compressed spring between them. If the masses are released, the spring will push them away from each other. If the smaller mass moves off with a velocity of 6m/s, what is the stored energy in the spring when it is compressed? Asume there is no external force.
Emmanuel
Inuwa
By using the Quotient Rule dy/dx = 3y/(x +y)²
Emmanuel
3y/(x+y)²
Emmanuel
may be by using MC^2=MC^2 and Total energy=kinetic energy +potential energy so 1st find kinetic energy and den find potential energy which is stored energy
rakesh
i think i m correct
rakesh
But how?
Emmanuel
3y/(x+y)²
Douglas
what's the big bang?
yes what is it?
LamaBbake
it is the explanation of how the universe began
Zainab
yes
Ana
explain
Chinagorom
in
Chinagorom
it is a theory on how the universe began. to understand more I would suggest researching the topic online.
david
thanks guys
kwame
if a force of 12N is applied to load of 200g what us the work done
We can seek accelation first
Nancy
we are given f=12 m=200g which is 0.2kg now from 2nd law of newton a= f/m=60m/s*2 work done=force applied x displacement cos (theta) w= 12x60 =720nm/s*2
Mudang
this very interesting question very complicated for me, í need urgent help. 1,two buses A and B travel along the same road in the same direction from Harper city (asume They both started from the same point) to Monrovia. if bus A maintains a Speedy of 60km/h and bus B a Speedy of 75km/h, how many
mohammed
hours Will it take bus B to overtake bus A assuming bus B starts One hour after bus A started. what is the distance travelled by the buses when They meet?.
mohammed
pls í need help
mohammed
4000 work is done
Ana
speed=distance /time distance=speed/time
Ana
now use this formula
Ana
Julius
great Mudang
Kossi
babar
hey mudang there is a product of force and acceleration not force and displacement
babar
@Mohammed answer is 0.8hours or 48mins
Douglas
nice
A.d
its not possible
Olalekan
í want the working procedure
mohammed
the answer is given but how Will One arrive at it. the answers are 4hours and 300m.
mohammed
physics is the science that studies the non living nature
ancient greek language physis = nature
isidor
what is phyacs
if i am going to start studying physics where should i start?
I think from kinematics
Nancy
You can find physics books at the library or online. That's how I started.
Chelsea
And yes, kinematics is usually where you can begin.
Chelsea
study basic algebra and calculus and can start from classical mechanics
Mudang
yes think so but dimension is the best starting point
Obed
3 formula's of equations of motion
vf=vi+at........1 s=vit+1/2(at)2 vf2=vi2+2as
Ana
benjamin
those are the three .. what you wanna solve ?
Nihrantz
For first equation simply integrate formula of acceleration in the limit v and u
Tripti
For second itegrate velocity formula by ising first equation
Tripti
similarly for 3 one integrate acceleration again by multiplying and dividing term ds
Tripti
any methods can take to solve this eqtions
a=vf-vi/t vf-vi=at vf=vi+at......1
Ana
suppose a body starts with an initial velocity vi and travels with uniform acceleration a for a period of time t.the distance covered by a body in this time is "s" and its final velocity becomes vf
Ana
what is the question dear
Zeeshan
average velocity=(vi+vf)/2 distance travelled=average velocity ×time therefore s=vi+vf/2×t from the first equation of motion ,we have vf =vi+at s=[vi+(vi+at)]/2×t s=(2vi+at)/2×t s=bit+1/2at2
Ana
find the distance
Ana
how
Zeeshan
Two speakers are arranged so that sound waves with the same frequency are produced and radiated through a room. An interference pattern is created. Calculate the distance between the two speakers?
How can we calculate without any information?
Amir
I think the formulae used for this question is lambda=(ax)/D
Amir