# 24.3 The electromagnetic spectrum  (Page 12/33)

 Page 12 / 33

## X-rays

In the 1850s, scientists (such as Faraday) began experimenting with high-voltage electrical discharges in tubes filled with rarefied gases. It was later found that these discharges created an invisible, penetrating form of very high frequency electromagnetic radiation. This radiation was called an X-ray    , because its identity and nature were unknown.

As described in Things Great and Small , there are two methods by which X-rays are created—both are submicroscopic processes and can be caused by high-voltage discharges. While the low-frequency end of the X-ray range overlaps with the ultraviolet, X-rays extend to much higher frequencies (and energies).

X-rays have adverse effects on living cells similar to those of ultraviolet radiation, and they have the additional liability of being more penetrating, affecting more than the surface layers of cells. Cancer and genetic defects can be induced by exposure to X-rays. Because of their effect on rapidly dividing cells, X-rays can also be used to treat and even cure cancer.

The widest use of X-rays is for imaging objects that are opaque to visible light, such as the human body or aircraft parts. In humans, the risk of cell damage is weighed carefully against the benefit of the diagnostic information obtained. However, questions have risen in recent years as to accidental overexposure of some people during CT scans—a mistake at least in part due to poor monitoring of radiation dose.

The ability of X-rays to penetrate matter depends on density, and so an X-ray image can reveal very detailed density information. [link] shows an example of the simplest type of X-ray image, an X-ray shadow on film. The amount of information in a simple X-ray image is impressive, but more sophisticated techniques, such as CT scans, can reveal three-dimensional information with details smaller than a millimeter.

The use of X-ray technology in medicine is called radiology—an established and relatively cheap tool in comparison to more sophisticated technologies. Consequently, X-rays are widely available and used extensively in medical diagnostics. During World War I, mobile X-ray units, advocated by Madame Marie Curie, were used to diagnose soldiers.

Because they can have wavelengths less than 0.01 nm, X-rays can be scattered (a process called X-ray diffraction) to detect the shape of molecules and the structure of crystals. X-ray diffraction was crucial to Crick, Watson, and Wilkins in the determination of the shape of the double-helix DNA molecule.

X-rays are also used as a precise tool for trace-metal analysis in X-ray induced fluorescence, in which the energy of the X-ray emissions are related to the specific types of elements and amounts of materials present.

## Gamma rays

Soon after nuclear radioactivity was first detected in 1896, it was found that at least three distinct types of radiation were being emitted. The most penetrating nuclear radiation was called a gamma ray     ( $\gamma$ ray) (again a name given because its identity and character were unknown), and it was later found to be an extremely high frequency electromagnetic wave.

Give an example (but not one from the text) of a device used to measure time and identify what change in that device indicates a change in time.
hour glass, pendulum clock, atomic clock?
S.M
tnks
David
how did they solve for "t" after getting 67.6=.5(Voy + 0)t
Find the following for path D in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.
the topic is kinematics
David
can i get notes of solid state physics
Lohitha
just check the chpt. 13 kinetic theory of matter it's there
David
is acceleration a fundamental unit.
no it is derived
Abdul
no
Nisha
K thanks
David
hi guys can you teach me how to solve a logarithm?
how about a conceptual framework can you simplify for me? needed please
Villaflor
Hello what happens when electrone stops its rotation around its nucleus if it possible how
Afzal
I think they are constantly moving
Villaflor
yep what is problem you are stuck into context?
S.M
not possible to fix electron position in space,
S.M
Physics
Beatriz
yes of course Villa flor
David
equations of kinematics for constant acceleration
A bottle full of water weighs 45g when full of mercury,it weighs 360g.if the empty bottle weighs 20g.calculate the relative density of mercury and the density of mercury....pls I need help
well You know the density of water is 1000kg/m^3.And formula for density is density=mass/volume Then we must calculate volume of bottle and mass of mercury: Volume of bottle is (45-20)/1000000=1/40000 mass of mercury is:(360-20)/1000 kg density of mercury:(340/1000):1/50000=(340•40000):1000=13600
Sobirjon
the latter is true
Sobirjon
100g of water is mixed with 60g of a liquid of relative density 1.2.assuming no changes in volume occurred,find the average relative density of the mixture...take density of water as 1g/cm3 and density of liquid 1.2g/cm3
Lila
plz hu can explain Heisenberg's uncertainty principle
who can help me with my problem about acceleration?
ok
Nicholas
how to solve this... a car is heading north then smoothly made a westward turn during the travel the speed of the car remains constant at 1.5km/h what is the acceleration of the car? the total travel time of the car as it smoothly changed its direction is 15 minutes
Vann
i think the acceleration is 0 since the car does not change its speed unless there are other conditions
Ben
yes I have to agree, the key phrase is, "the speed of the car remains constant...," all other information is not needed to conclude that acceleration remains at 0 during the entire time
Luis
who can help me with a relative density question
Lila
1cm3 sample of tin lead alloy has mass 8.5g.the relative density of tin is 7.3 and that of lead is 11.3.calculate the percentage by weight of tin in the alloy. assuming that there is no change of volume when the metals formed the alloy
Lila
morning, what will happen to the volume of an ice block when heat is added from -200°c to 0°c... Will it volume increase or decrease?
no
Emmanuel
hi what is physical education?
Kate
BPED..is my course.
Kate
No
Emmanuel
I think it is neither decreases nor increases ,it remains in the same volume because of its crystal structure
Sobirjon
100g of water is mixed with 60g of a liquid of relative density 1.2.assuming no changes in volume occurred,find the average relative density of the mixture. take density of water as 1g/cm3 and density of liquid as 1.2g/cm3
Lila
Sorry what does it means"no changes in volume occured"?
Sobirjon
volume can be the amount of space occupied by an object. But when an object does not change in shape it will still occupy the same space. Thats why the volume will still remain the same
Ben
Most soilds expand when heated but if it changes state at 0C it will have less volume. Ice floats because it is less dense ie a larger mass per unit volume.
Richard
how to calculate velocity
v=d/t
Emeka
Villaflor
Villaflor
v=d/t
Nisha
hello bro hw is life with you
Mine is good. How about you?
Chase
Hi room of engineers
yes,hi sir
Okwethu
hello
akinmeji
Hello
Mishael
hello
Jerry
hi
Sakhi
hi
H.C
so, what is going on here
akinmeji
Ajayi
good morning ppl
ABDUL
If someone has not studied Mathematics enough yet, should theu study it first then study Phusics or Study Basics of Physics whilst srudying Math as well?
whether u studied maths or not, it is advisable to start from d basics cuz it is essential to know dem
Nuru
yea you are right
wow, you got this w/o knowing math
Thomas
I guess that's it
Thomas
later people
Thomas
mathematics is everywhere
Anand
thanks but dat doesn't mean it is good without maths @Riaz....... Maths is essential in sciences particularly wen it comes to PHYSICS but PHYSICS must be started from the basic which may also help in ur mathematical ability
Nuru
A hydrometer of mass 0.15kg and uniform cross sectional area of 0.0025m2 displaced in water of density 1000kg/m3.what depth will the hydrometer sink
Lila
16.66 meters?
Darshik
16.71m2
aways
,i have a question of let me give answer
aways
the mass is stretched a distance of 8cm and held what is the potential energy? quick answer
aways
oscillation is a to and fro movement, it can also be referred to as vibration. e.g loaded string, loaded test tube or an hinged door