<< Chapter < Page Chapter >> Page >
Thermal expansion coefficients at 20 º C size 12{"20"°C} {} Values for liquids and gases are approximate.
Material Coefficient of linear expansion α ( 1 / º C ) size 12{α \( 1/°C \) } {} Coefficient of volume expansion β ( 1 / º C ) size 12{β \( 1/°C \) } {}
Solids
Aluminum 25 × 10 6 size 12{"25" times "10" rSup { size 8{–6} } } {} 75 × 10 6 size 12{"75"´"10" rSup { size 8{ +- 6} } } {}
Brass 19 × 10 6 size 12{"19" times "10" rSup { size 8{–6} } } {} 56 × 10 6 size 12{"56"´"10" rSup { size 8{ +- 6} } } {}
Copper 17 × 10 6 size 12{"17" times "10" rSup { size 8{–6} } } {} 51 × 10 6 size 12{"51" times "10" rSup { size 8{–6} } } {}
Gold 14 × 10 6 size 12{"14" times "10" rSup { size 8{–6} } } {} 42 × 10 6 size 12{"42" times "10" rSup { size 8{–6} } } {}
Iron or Steel 12 × 10 6 size 12{"12" times "10" rSup { size 8{–6} } } {} 35 × 10 6 size 12{"35" times "10" rSup { size 8{–6} } } {}
Invar (Nickel-iron alloy) 0 . 9 × 10 6 size 12{0 "." 9 times "10" rSup { size 8{–6} } } {} 2 . 7 × 10 6 size 12{2 "." 7 times "10" rSup { size 8{–6} } } {}
Lead 29 × 10 6 size 12{"29" times "10" rSup { size 8{–6} } } {} 87 × 10 6 size 12{"87" times "10" rSup { size 8{–6} } } {}
Silver 18 × 10 6 size 12{"18" times "10" rSup { size 8{–6} } } {} 54 × 10 6 size 12{"54" times "10" rSup { size 8{–6} } } {}
Glass (ordinary) 9 × 10 6 size 12{9 times "10" rSup { size 8{–6} } } {} 27 × 10 6 size 12{"27" times "10" rSup { size 8{–6} } } {}
Glass (Pyrex®) 3 × 10 6 size 12{3 times "10" rSup { size 8{–6} } } {} 9 × 10 6 size 12{9 times "10" rSup { size 8{–6} } } {}
Quartz 0 . 4 × 10 6 size 12{0 "." 4´"10" rSup { size 8{ +- 6} } } {} 1 × 10 6 size 12{1 times "10" rSup { size 8{–6} } } {}
Concrete, Brick ~ 12 × 10 6 size 12{ "~" "12"´"10" rSup { size 8{ +- 6} } } {} ~ 36 × 10 6 size 12{ "~" "36" times "10" rSup { size 8{–6} } } {}
Marble (average) 2 . 5 × 10 6 size 12{2 "." 5´"10" rSup { size 8{ +- 6} } } {} 7 . 5 × 10 6 size 12{7 "." 5 times "10" rSup { size 8{–6} } } {}
Liquids
Ether 1650 × 10 6 size 12{"1650" times "10" rSup { size 8{–6} } } {}
Ethyl alcohol 1100 × 10 6 size 12{"1100" times "10" rSup { size 8{–6} } } {}
Petrol 950 × 10 6 size 12{"950" times "10" rSup { size 8{–6} } } {}
Glycerin 500 × 10 6 size 12{"500" times "10" rSup { size 8{–6} } } {}
Mercury 180 × 10 6 size 12{"180" times "10" rSup { size 8{–6} } } {}
Water 210 × 10 6 size 12{"210" times "10" rSup { size 8{–6} } } {}
Gases
Air and most other gases at atmospheric pressure 3400 × 10 6 size 12{"3400" times "10" rSup { size 8{–6} } } {}

Calculating linear thermal expansion: the golden gate bridge

The main span of San Francisco’s Golden Gate Bridge is 1275 m long at its coldest. The bridge is exposed to temperatures ranging from 15 º C size 12{–"15"°C} {} to 40 º C size 12{"40"°C} {} . What is its change in length between these temperatures? Assume that the bridge is made entirely of steel.

Strategy

Use the equation for linear thermal expansion Δ L = αL Δ T size 12{ΔL=αL`ΔT} {} to calculate the change in length , Δ L size 12{ΔL} {} . Use the coefficient of linear expansion, α size 12{α} {} , for steel from [link] , and note that the change in temperature, Δ T size 12{ΔT} {} , is 55 º C size 12{"55"°C} {} .

Solution

Plug all of the known values into the equation to solve for Δ L size 12{ΔL} {} .

Δ L = αL Δ T = 12 × 10 6 º C 1275 m 55 º C = 0 . 84 m. size 12{ΔL=αLΔT= left ( { {"12" times "10" rSup { size 8{ - 6} } } over {°C} } right ) left ("1275 m" right ) left ("55"°C right )=0 "." "84 m"} {}

Discussion

Although not large compared with the length of the bridge, this change in length is observable. It is generally spread over many expansion joints so that the expansion at each joint is small.

Got questions? Get instant answers now!

Thermal expansion in two and three dimensions

Objects expand in all dimensions, as illustrated in [link] . That is, their areas and volumes, as well as their lengths, increase with temperature. Holes also get larger with temperature. If you cut a hole in a metal plate, the remaining material will expand exactly as it would if the plug was still in place. The plug would get bigger, and so the hole must get bigger too. (Think of the ring of neighboring atoms or molecules on the wall of the hole as pushing each other farther apart as temperature increases. Obviously, the ring of neighbors must get slightly larger, so the hole gets slightly larger).

Thermal expansion in two dimensions

For small temperature changes, the change in area Δ A size 12{ΔA} {} is given by

Δ A = 2 αA Δ T , size 12{ΔA=2αAΔT} {}

where Δ A size 12{ΔA} {} is the change in area A size 12{A} {} , Δ T size 12{ΔT} {} is the change in temperature, and α size 12{α} {} is the coefficient of linear expansion, which varies slightly with temperature.

Part a shows the outline of a flat metal plate before and after expansion. After expansion, it has the same shape and ratio of dimensions as before, but it takes up a greater area. Part b shows the outline of a flat metal plate with a hole in it, before and after expansion. The hole expands. Part c shows the outline of a rectangular box before and after expansion. After expansion, the box has the same proportions as before expansion, but it has a greater volume.
In general, objects expand in all directions as temperature increases. In these drawings, the original boundaries of the objects are shown with solid lines, and the expanded boundaries with dashed lines. (a) Area increases because both length and width increase. The area of a circular plug also increases. (b) If the plug is removed, the hole it leaves becomes larger with increasing temperature, just as if the expanding plug were still in place. (c) Volume also increases, because all three dimensions increase.

Thermal expansion in three dimensions

The change in volume Δ V size 12{ΔV} {} is very nearly Δ V = 3 α V Δ T size 12{ΔV=3αVΔT} {} . This equation is usually written as

Δ V = βV Δ T , size 12{ΔV=βVΔT} {}

where β size 12{β} {} is the coefficient of volume expansion    and β size 12{β approx 3α} {} . Note that the values of β size 12{β} {} in [link] are almost exactly equal to size 12{3α} {} .

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply
Practice Key Terms 4

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics for ap® courses. OpenStax CNX. Nov 04, 2016 Download for free at https://legacy.cnx.org/content/col11844/1.14
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics for ap® courses' conversation and receive update notifications?

Ask