Draw a circuit with resistors in parallel and in series.
Use Ohm’s law to calculate the voltage drop across a resistor when current passes through it.
Contrast the way total resistance is calculated for resistors in series and in parallel.
Explain why total resistance of a parallel circuit is less than the smallest resistance of any of the resistors in that circuit.
Calculate total resistance of a circuit that contains a mixture of resistors connected in series and in parallel.
The information presented in this section supports the following AP® learning objectives and science practices:
4.E.5.1 The student is able to make and justify a quantitative prediction of the effect of a change in values or arrangements of one or two circuit elements on the currents and potential differences in a circuit containing a small number of sources of emf, resistors, capacitors, and switches in series and/or parallel.
(S.P. 2.2, 6.4)
4.E.5.2 The student is able to make and justify a qualitative prediction of the effect of a change in values or arrangements of one or two circuit elements on currents and potential differences in a circuit containing a small number of sources of emf, resistors, capacitors, and switches in series and/or parallel.
(S.P. 6.1, 6.4)
4.E.5.3 The student is able to plan data collection strategies and perform data analysis to examine the values of currents and potential differences in an electric circuit that is modified by changing or rearranging circuit elements, including sources of emf, resistors, and capacitors.
(S.P. 2.2, 4.2, 5.1)
5.B.9.3 The student is able to apply conservation of energy (Kirchhoff’s loop rule) in calculations involving the total electric potential difference for complete circuit loops with only a single battery and resistors in series and/or in, at most, one parallel branch.
(S.P. 2.2, 6.4, 7.2)
Most circuits have more than one component, called a
resistor that limits the flow of charge in the circuit. A measure of this limit on charge flow is called
resistance . The simplest combinations of resistors are the series and parallel connections illustrated in
[link] . The total resistance of a combination of resistors depends on both their individual values and how they are connected.
Resistors in series
When are resistors in
series ? Resistors are in series whenever the flow of charge, called the
current , must flow through devices sequentially. For example, if current flows through a person holding a screwdriver and into the Earth, then
in
[link] (a) could be the resistance of the screwdriver’s shaft,
the resistance of its handle,
the person’s body resistance, and
the resistance of her shoes.
[link] shows resistors in series connected to a
voltage source. It seems reasonable that the total resistance is the sum of the individual resistances, considering that the current has to pass through each resistor in sequence. (This fact would be an advantage to a person wishing to avoid an electrical shock, who could reduce the current by wearing high-resistance rubber-soled shoes. It could be a disadvantage if one of the resistances were a faulty high-resistance cord to an appliance that would reduce the operating current.)
Wayne and Dennis like to ride the bike path from Riverside Park to the beach. Dennis’s speed is seven miles per hour faster than Wayne’s speed, so it takes Wayne 2 hours to ride to the beach while it takes Dennis 1.5 hours for the ride. Find the speed of both bikers.
from theory: distance [miles] = speed [mph] × time [hours]
info #1
speed_Dennis × 1.5 = speed_Wayne × 2
=> speed_Wayne = 0.75 × speed_Dennis (i)
info #2
speed_Dennis = speed_Wayne + 7 [mph] (ii)
use (i) in (ii) => [...]
speed_Dennis = 28 mph
speed_Wayne = 21 mph
George
Let W be Wayne's speed in miles per hour and D be Dennis's speed in miles per hour. We know that W + 7 = D and W * 2 = D * 1.5.
Substituting the first equation into the second:
W * 2 = (W + 7) * 1.5
W * 2 = W * 1.5 + 7 * 1.5
0.5 * W = 7 * 1.5
W = 7 * 3 or 21
W is 21
D = W + 7
D = 21 + 7
D = 28
Salma
Devon is 32 32 years older than his son, Milan. The sum of both their ages is 54 54. Using the variables d d and m m to represent the ages of Devon and Milan, respectively, write a system of equations to describe this situation. Enter the equations below, separated by a comma.
please why is it that the 0is in the place of ten thousand
Grace
Send the example to me here and let me see
Stephen
A meditation garden is in the shape of a right triangle, with one leg 7 feet. The length of the hypotenuse is one more than the length of one of the other legs. Find the lengths of the hypotenuse and the other leg
however, may I ask you some questions about Algarba?
Amoon
hi
Enock
what the last part of the problem mean?
Roger
The Jones family took a 15 mile canoe ride down the Indian River in three hours. After lunch, the return trip back up the river took five hours. Find the rate, in mph, of the canoe in still water and the rate of the current.
Shakir works at a computer store. His weekly pay will be either a fixed amount, $925, or $500 plus 12% of his total sales. How much should his total sales be for his variable pay option to exceed the fixed amount of $925.
I'm guessing, but it's somewhere around $4335.00 I think
Lewis
12% of sales will need to exceed 925 - 500, or 425 to exceed fixed amount option. What amount of sales does that equal? 425 ÷ (12÷100) = 3541.67. So the answer is sales greater than 3541.67.
Check:
Sales = 3542
Commission 12%=425.04
Pay = 500 + 425.04 = 925.04.
925.04 > 925.00
Munster
difference between rational and irrational numbers
Jazmine trained for 3 hours on Saturday. She ran 8 miles and then biked 24 miles. Her biking speed is 4 mph faster than her running speed. What is her running speed?