<< Chapter < Page Chapter >> Page >
Use the LabVIEW documentation resources to build a VI that generates a signal, reduces the number of samples in the signal, and displays the resulting data in a table on the front panel.

In the following exercises, you will open a blank VI and add Express VIs and structures to the block diagram to build a newVI. When you complete the exercise, the front panel of the VI will appear similar to the .

Opening a blank vi

If no template is available for the task you want to create, you can start with a blank VI and add Express VIs toaccomplish the specific task. Complete the following steps to open a blank VI.

  • In the LabVIEW dialog box, click the arrow on the New button and select Blank VI from the shortcut menu or press the Ctrl-N keys to open a blank VI.Notice that a blank front panel and block diagram appear.
  • If the Functions palette is not visible, right-click any blank space on the block diagram to displaythe Functions palette. Click the thumbtack, shown in , in the upper left corner of the Functions palette to place the palette on the screen.
You can right-click a blank space on the block diagram or the front panel to display the Functions or Controls palettes.

Adding an express vi that simulates a signal

Complete the following steps to find the Express VI you want to use and then add it to the block diagram.

  • If the Context Help window is not visible, press the Ctrl-H keys to open the Context Help window. You also can press the Show Context Help Window button, shown in , to open the Context Help window.
  • Select the Input palette on the Functions palette and move the cursor over the Express VIs on the Input palette.Notice that the Context Help window displays information about the function of each Express VI.
  • From the information provided in the Context Help window, find the Express VI that can simulate a sine wave signal.
  • Select the Express VI and place it on the block diagram. The Configure Simulate Signal dialog box appears.
  • Idle the cursor over the various options in the Configure Simulate Signal dialog box, such as Frequency (Hz) , Amplitude , and Samples per second (Hz) . Read the information that appears in the Context Help window.
  • Configure the Simulate Signal Express VI to generate a sine wave with a frequency of 10.7 and amplitude of 2 .
  • Notice how the signal displayed in the Result Preview window changes to reflect the configured sine wave.
  • Close the Configure Simulate Signal dialog box by clicking the OK button.
  • Move the cursor over the Simulate Signal Express VI and read the information that appears in the Context Help window.Notice that the Context Help window now displays the configuration of the Simulate Signal Express VI.
  • Save this VI as Reduce Samples.vi in the C:\Exercises\LabVIEW Basics I directory.

Modifying the signal

Complete the following steps to use the LabVIEW Help to search for the Express VI that reduces the number of samples in a signal.

  • Select Help>>VI, Function,&How-To Help to open the LabVIEW Help .
  • Click the Search tab and type sample compression in the Type in the word(s) to search for text box.Notice that this word choice reflects what you want this Express VI to do-compress, or reduce, the number of samplesin a signal.
  • To begin the search, press the Enter key or click the List Topics button.
  • Double-click the Sample Compression topic to display the topic that describes the Sample Compression Express VI.
  • After you read the description of the Express VI, click the Place on the block diagram button to select the Express VI.
  • Move the cursor to the block diagram.Notice how LabVIEW attaches the Sample Compression Express VI to the cursor.
  • Place the Sample Compression Express VI on the block diagram to the right ofthe Simulate Signal Express VI.
  • Configure the Sample Compression Express VI to reduce the signal by a factor of 25 using the mean of these values.
  • Close the Configure Sample Compression dialog box.
  • Using the Wiring tool, wire the Sine output in the Simulate Signal Express VI to the Signals input in the Sample Compression Express VI.

Customizing the front panel

In a previous exercise , you added controls and indicators to the front panel using the Controls palette. You also can add controls and indicators from the block diagram. Complete the followingsteps to create controls and indicators as shown in .

  • Right-click the Mean output in the Sample Compression Express VI and select Create>>Numeric Indicator from the shortcut menu to create a numeric indicator.
  • Right-click the Mean output of the Sample Compression Express VI and select Insert Input/Output from the shortcut menu to insert the Enable input.
  • Right-click the Enable input and select Create>>Control from the shortcut menu to create the Enable switch.
  • Right-click the wire linking the Sine output in the Simulate Signal Express VI to the Signals input in the Signal Compression Express VI and select Create>>Graph Indicator from the shortcut menu.Notice that you can create controls and indicators from the block diagram. When you create controls and indicators usingthis method, LabVIEW automatically creates terminals that are labeled and formatted correctly.
  • Using the Wiring tool, wire the Mean output in the Sample Compression Express VI to the Sine graph indicator terminal created in the previous step.Notice that the Merge Signals function appears.
  • Arrange the objects on the block diagram so that they appear similar to .
    You can right-click any wire and select Clean Up Wire from the shortcut menu to automatically route an existing wire.
  • Display the front panel.Notice that the controls and indicators you added automatically appear on the front panel with labels thatcorrespond to their function.
  • Save this VI.

Configuring the vi to run continuously until the user stops it

In the current state, the VI runs once, generates one signal, then stops executing. To run the VI until a condition is met,you can add a While Loop to the block diagram. Complete the following steps to add a While Loop .

  • Display the front panel and run the VI.Notice how the VI runs once and then stops. Also notice how there is no Stop button.
  • Display the block diagram and select the While Loop on the Functions>>Execution Control palette.
  • Move the cursor to the upper left corner of the block diagram. Place the top left corner of the While Loop here.
  • Click and drag the cursor diagonally to enclose all the Express VIs and wires, as shown in .
    Notice that the While Loop , shown in , appears with a Stop button wired to the condition terminal. This While Loop is configured to stop when the user clicks the Stop button.
  • Display the front panel and run the VI.Notice that the VI now runs until you click the Stop button. A While Loop executes the functions inside the loop until the user presses the Stop button. Refer to Repetition and Loops for more information about While Loops .

Controlling the speed of execution

To plot the points on the waveform graph more slowly, you can add a time delay to the block diagram. Complete the followingsteps to control the speed at which the VI executes.

  • On the block diagram, select the Time Delay Express VI on the Functions>>Execution Control palette and place it inside the loop.
  • Type .250 in the Time delay (seconds) text box.This time delay specifies how fast the loop runs. With a .250 second time delay, the loop iterates once every quarter of asecond.
  • Close the Configure Time Delay dialog box.
  • Save this VI.
  • Display the front panel and run the VI.
  • Click the Enable switch and notice the change on the graph.Notice how if the Enable switch is on, the graph displays the reduced signal. If the Enable switch is off, the graph does not display the reduced signal.
  • Click the Stop button to stop the VI.

Using a table to display data

Complete the following steps to display a collection of meanvalues in a table on the front panel.

  • On the front panel, select the Express Table indicator on the Controls>>Text Indicators palette and place it on the front panel to the right of the waveform graph.
  • Display the block diagram.Notice that the Table terminal appears wired to the Build Table Express VI automatically.
  • If the Build Table Express VI and the Table terminal are not selected already, click an open space on the block diagram to the left of the Build Table Express VI and the Table terminal. Drag the cursor diagonally until the selection rectangle encloses the Build Table Express VI and the Table terminal, shown in .A moving dashed outline called a marquee highlights the Build Table Express VI, the Table terminal, and the wire joining the two.
  • Drag the objects into the While Loop to the right of the Mean terminal.Notice that the While Loop automatically resizes to enclose the Build Table Express VI and the Table terminal.
  • Using the Wiring tool, wire the Mean terminal of the Sample Compression Express VI to the Signals input of the Build Table Express VI.The block diagram should appear similar to .
  • Display the front panel and run the VI.
  • Click the Enable switch.The table displays the mean values of every 25 samples of the sine wave. Notice if the Enable switch is off, the table does not record the mean values.
  • Stop the VI.
  • Experiment with properties of the table by using the Table Properties dialog box. For example, try changing the number of columns to one.
  • Save and close this VI.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Pdf generation test course. OpenStax CNX. Dec 16, 2009 Download for free at http://legacy.cnx.org/content/col10278/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Pdf generation test course' conversation and receive update notifications?

Ask