<< Chapter < Page Chapter >> Page >

Decision point one

    Decision point one

  • Frank Saia has worked at Hughes Aircraft for a long time. Now he is faced with the most difficult decisions of his career. He has been having problems in the environmental testing phase of his microchip manufacturing plant; the detailed nature of these tests has caused Hughes to be consistently late in delivering the chips to customers.
  • Because of the time pressure to deliver chips, Saia has been working to make the production of chips more efficient without losing the quality of the product. Chips are manufactured and then tested, and this provides two places where the process can bottle up. Even though you might have a perfectly fine chip on the floor of the plant, it cannot be shipped without testing. And, since there are several thousand other chips waiting to be tested, it can sit in line for a long time. Saia has devised a method that allows testers to put the important chips, the “hot parts,” ahead of the others without disrupting the flow and without losing the chips in the shuffle. He has also added a “gross leak” test that quickly tells if a chip in a sealed container is actually sealed or not. Adding this test early in the testing sequence allows environmental testing to avoid wasting time by quickly eliminating chips that would fail a more fine-grained leak test later in the sequence.
  • Because environmental testing is still falling behind, Saia’s supervisors and Hughes customers are getting angry and have begun to apply pressure. Karl Reismueller, the director of the Division of Microelectronics at Hughes, has given Saia’s telephone number to several customers, whose own production lines were shut down awaiting the parts that Saia has had trouble delivering. His customers are now calling him directly to say “we’re dying out here” for need of parts.

    Dialogue for decision point one

  • Construct a dialogue in which Saia responds to the pressure from his supervisor, Karl Reismueller
  • Be sure to address the customer complaints

Decision point two

    Decision point two

  • Frank Saia has discovered that an employee under his supervision, Donald LaRue, has been skipping tests on the computer chips. Since LaRue began this practice, they have certainly been more on time in their shipments. Besides, both LaRue and Saia know that many of the “hot” parts are actually for systems in the testing phase, rather than for ones that will be put into active use. So testing the chips for long-term durability that go into these systems seems unnecessary. Still, LaRue was caught by Quality Control skipping a test, and now Saia needs to make a decision. Upper management has provided no guidance; they simply told him to “handle it” and to keep the parts on time.
  • He can’t let LaRue continue skipping tests, or at least he shouldn’t let this skipping go unsupervised. LaRue is a good employee, but he doesn’t have the science background to know which tests would do the least damage if they were skipped. He could work with LaRue and help him figure out the best tests to skip so the least harm is done. But getting directly involved in skipping the tests would mean violating company policy and federal law.

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Business ethics. OpenStax CNX. Sep 04, 2013 Download for free at http://legacy.cnx.org/content/col10491/1.11
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Business ethics' conversation and receive update notifications?

Ask