<< Chapter < Page Chapter >> Page >
A model of the human vocal tract.

Vocal tract

The vocal tract is shown in cross-section. Air pressure produced by the lungs forces air through the vocal cords that,when under tension, produce puffs of air that excite resonances in the vocal and nasal cavities. What are not shownare the brain and the musculature that control the entire speech production process.

Model of the vocal tract

The systems model for the vocal tract. The signals l t , p T t , and s t are the air pressure provided by the lungs, the periodic pulse output provided by the vocal cords, and the speech outputrespectively. Control signals from the brain are shown as entering the systems from the top. Clearly, these come fromthe same source, but for modeling purposes we describe them separately since they control different aspects of the speechsignal.

The information contained in the spoken word is conveyed by the speech signal. Because we shall analyze several speechtransmission and processing schemes, we need to understand the speech signal's structure -- what's special about the speechsignal -- and how we can describe and model speech production. This modeling effort consists of finding a system's description of how relatively unstructured signals,arising from simple sources, are given structure by passing them through an interconnection of systems to yield speech. Forspeech and for many other situations, system choice is governed by the physics underlying the actual production process. Becausethe fundamental equation of acoustics -- the wave equation -- applies here and is linear, we can use linear systems in ourmodel with a fair amount of accuracy. The naturalness of linear system models for speech does not extend to other situations. Inmany cases, the underlying mathematics governed by the physics, biology, and/or chemistry of the problem are nonlinear, leavinglinear systems models as approximations. Nonlinear models are far more difficult at the current state of knowledge tounderstand, and information engineers frequently prefer linear models because they provide a greater level of comfort, but notnecessarily a sufficient level of accuracy.

[link] shows the actual speech production system and [link] shows the model speech production system. The characteristics of the model depends on whether you are saying a vowel or a consonant. Weconcentrate first on the vowel production mechanism. When the vocal cords are placed under tension by the surroundingmusculature, air pressure from the lungs causes the vocal cords to vibrate. To visualize this effect, take a rubber band andhold it in front of your lips. If held open when you blow through it, the air passes through more or less freely; thissituation corresponds to "breathing mode". If held tautly and close together, blowing through the opening causes the sides ofthe rubber band to vibrate. This effect works best with a wide rubber band. You can imagine what the airflow is like on theopposite side of the rubber band or the vocal cords. Your lung power is the simple source referred to earlier; it can bemodeled as a constant supply of air pressure. The vocal cords respond to this input by vibrating, which means the output ofthis system is some periodic function.

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Fundamentals of electrical engineering i. OpenStax CNX. Aug 06, 2008 Download for free at http://legacy.cnx.org/content/col10040/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Fundamentals of electrical engineering i' conversation and receive update notifications?

Ask