<< Chapter < Page Chapter >> Page >
This module was developed as part of the Rice University course CHEM-496: Chemistry of Electronic Materials . This module was prepared with the assistance of Angela Cindy Wei.

Photolithography

In photolithography, a pattern may be transferred onto a photoresist film by exposing the photoresist to light through a mask of the pattern. In the semiconductor industry, the photolithographic procedure includes the following steps as illustrated in [link] : coating a base material with photoresist, exposing the resist through a mask to light, developing the resist, etching the exposed areas of the base, and stripping the remaining resist off.

Steps in optical printing using photolithography.

Upon exposure to light, the photoresist may become more or less soluble depending on the chemical properties of the particular resist material. The photochemical reactions include chain scission, cross-linking, and the rearrangement of molecules. If the exposed areas of the photoresist become more soluble, then it is a positive resist; conversely, if the exposed resist becomes less soluble, then it is a negative resist. In developing the photoresist, the more soluble material is removed leaving a positive or a negative image of the mask pattern.

Photoresist

Photoresists were initially developed for the printing industry. In the 1920s, the application of photoresists spread to the printed circuit board industry. Photoresists for semiconductor use were first developed in the 1950s; Kodak developed commercial negative photoresists and shortly after, Shipley developed a line of positive resists. Several other companies have entered the market since that time in hopes of manufacturing resist products which meet the increasing demands of the semiconductor industry: narrower line widths, fewer defects, and higher production rates.

Photoresist composition

Several functional requirements must be met for a photoresist to be used in the semiconductor industry. Photoresist polymers must be soluble for easy deposition onto a substrate by spin-coating. Good photoresist-substrate adhesion properties are required to minimize undercutting, to maintain edge acuity, and to control the feature sizes. The photoresist must be chemically resistant to whichever etchants are to be used. Sensitivity of the photoresist to a particular light source is essential to the functionality of a photoresist. The speed at which chemical changes occur in a photoresist is its contrast. The contrast of a resist is dependent on the molecular weight distribution of the polymers: a broad molecular weight distribution results in a low contrast resist. High contrast resists produce higher resolution images.

The four basic components of a photoresist are the polymer, the solvent, sensitizers, and other additives. The role of the polymer is to either polymerize or photosolubilize when exposed to light. Solvents allow the photoresist to be applied by spin-coating. The sensitizers control the photochemical reactions and additives may be used to facilitate processing or to enhance material properties. Photochemical changes to polymers are essential to the functionality of a photoresist. Polymers are composed primarily of carbon, hydrogen, and oxygen-based molecules arranged in a repeated pattern. Negative photoresists are based on polyisopreme polymers; negative resist polymers are not chemically bonded to each other, but upon exposure to light, the polymers crosslink, or polymerize. Positive photoresists are formulated from phenol-formaldehyde novolak resins; the positive resist polymers are relatively insoluble, but upon exposure to light, the polymers undergo photosolubilization.

Questions & Answers

what is mutation
Janga Reply
what is a cell
Sifune Reply
how is urine form
Sifune
what is antagonism?
mahase Reply
classification of plants, gymnosperm features.
Linsy Reply
what is the features of gymnosperm
Linsy
how many types of solid did we have
Samuel Reply
what is an ionic bond
Samuel
What is Atoms
Daprince Reply
what is fallopian tube
Merolyn
what is bladder
Merolyn
what's bulbourethral gland
Eduek Reply
urine is formed in the nephron of the renal medulla in the kidney. It starts from filtration, then selective reabsorption and finally secretion
onuoha Reply
State the evolution relation and relevance between endoplasmic reticulum and cytoskeleton as it relates to cell.
Jeremiah
what is heart
Konadu Reply
how is urine formed in human
Konadu
how is urine formed in human
Rahma
what is the diference between a cavity and a canal
Pelagie Reply
what is the causative agent of malaria
Diamond
malaria is caused by an insect called mosquito.
Naomi
Malaria is cause by female anopheles mosquito
Isaac
Malaria is caused by plasmodium Female anopheles mosquitoe is d carrier
Olalekan
a canal is more needed in a root but a cavity is a bad effect
Commander
what are pathogens
Don Reply
In biology, a pathogen (Greek: πάθος pathos "suffering", "passion" and -γενής -genēs "producer of") in the oldest and broadest sense, is anything that can produce disease. A pathogen may also be referred to as an infectious agent, or simply a germ. The term pathogen came into use in the 1880s.[1][2
Zainab
A virus
Commander
Definition of respiration
Muhsin Reply
respiration is the process in which we breath in oxygen and breath out carbon dioxide
Achor
how are lungs work
Commander
where does digestion begins
Achiri Reply
in the mouth
EZEKIEL
what are the functions of follicle stimulating harmones?
Rashima Reply
stimulates the follicle to release the mature ovum into the oviduct
Davonte
what are the functions of Endocrine and pituitary gland
Chinaza
endocrine secrete hormone and regulate body process
Achor
while pituitary gland is an example of endocrine system and it's found in the Brain
Achor
what's biology?
Egbodo Reply
Biology is the study of living organisms, divided into many specialized field that cover their morphology, physiology,anatomy, behaviour,origin and distribution.
Lisah
biology is the study of life.
Alfreda
Biology is the study of how living organisms live and survive in a specific environment
Sifune
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Chemistry of electronic materials. OpenStax CNX. Aug 09, 2011 Download for free at http://cnx.org/content/col10719/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Chemistry of electronic materials' conversation and receive update notifications?

Ask