<< Chapter < Page
  Digital signal processing - dsp     Page 16 / 19
Chapter >> Page >
Listing 10. Dsp031.java.
/* File Dsp031.java Copyright 2004, R.G.BaldwinRevised 5/17/2004 Performs spectral analysis on five separate timeseries, each 400 samples in length. Each time series contains a pulse and the pulsesare different lengths. Each pulse consists of a truncated sinusoid. Thefrequency of the sinusoid for all pulses is the same.All frequency values are specified as type double as a fraction of the sampling frequency.The frequency of all sinusoids is 0.0625 times the sampling frequency.The lengths of the pulses are: 25 samples50 samples 100 samples200 samples 400 samplesThe spectral analysis computes the spectra at 400 equally spaced points between zero and thefolding frequency (one-half the sampling frequency).The results of the spectral analysis are multiplied by the reciprocal of the lengths ofthe individual pulses to normalize all five plots to the same peak value. Otherwise, theresults for the short pulses would be too small to see on the plots.Tested using J2SEE 1.4.2 under WinXP. ************************************************/import java.util.*; class Dsp031 implements GraphIntfc01{final double pi = Math.PI; int len = 400;//data length//Sample that represents zero time. int zeroTime = 0;//Low and high frequency limits for the // spectral analysis.double lowF = 0.0; double highF = 0.5;int numberSpectra = 5; //Frequency of the sinusoidsdouble freq = 0.0625; //Amplitude of the sinusoidsdouble amp = 160; //Following arrays will contain data that is// input to the spectral analysis process. double[]data1 = new double[len];double[] data2 = new double[len]; double[]data3 = new double[len];double[] data4 = new double[len]; double[]data5 = new double[len];//Following arrays receive information back // from the spectral analysis that is not used// in this program. double[]real; double[]imag; double[]angle; //Following arrays receive the magnitude// spectral information back from the spectral // analysis process.double[] mag1;double[] mag2;double[] mag3;double[] mag4;double[] mag5;public Dsp031(){//constructor //Create the raw datafor(int x = 0;x<len/16;x++){ data1[x]= amp*Math.cos(2*pi*x*freq); }//end for loopfor(int x = 0;x<len/8;x++){ data2[x]= amp*Math.cos(2*pi*x*freq); }//end for loopfor(int x = 0;x<len/4;x++){ data3[x]= amp*Math.cos(2*pi*x*freq); }//end for loopfor(int x = 0;x<len/2;x++){ data4[x]= amp*Math.cos(2*pi*x*freq); }//end for loopfor(int x = 0;x<len;x++){ data5[x]= amp*Math.cos(2*pi*x*freq); }//end for loop//Compute magnitude spectra of the raw data // and save it in output arrays. Note that// the real, imag, and angle arrays are not // used later, so they are discarded each// time a new spectral analysis is performed. mag1 = new double[len]; real = new double[len]; imag = new double[len]; angle = new double[len]; ForwardRealToComplex01.transform(data1,real,imag,angle,mag1,zeroTime,lowF,highF); mag2 = new double[len]; real = new double[len]; imag = new double[len]; angle = new double[len]; ForwardRealToComplex01.transform(data2,real,imag,angle,mag2,zeroTime,lowF,highF); mag3 = new double[len]; real = new double[len]; imag = new double[len]; angle = new double[len]; ForwardRealToComplex01.transform(data3,real,imag,angle,mag3,zeroTime,lowF,highF); mag4 = new double[len]; real = new double[len]; imag = new double[len]; angle = new double[len]; ForwardRealToComplex01.transform(data4,real,imag,angle,mag4,zeroTime,lowF,highF); mag5 = new double[len]; real = new double[len]; imag = new double[len]; angle = new double[len]; ForwardRealToComplex01.transform(data5,real,imag,angle,mag5,zeroTime,lowF,highF); }//end constructor//-------------------------------------------// //The following six methods are required by the// interface named GraphIntfc01. public int getNmbr(){//Return number of functions to process. // Must not exceed 5.return 5; }//end getNmbr//-------------------------------------------// public double f1(double x){int index = (int)Math.round(x); if(index<0 || index>mag1.length-1){ return 0;}else{ //Scale the magnitude data by the// reciprocal of the length of the sinusoid // to normalize the five plots to the same// peak value. return mag1[index]*16.0; }//end else}//end function //-------------------------------------------// public double f2(double x){int index = (int)Math.round(x); if(index<0 || index>mag2.length-1){ return 0;}else{ return mag2[index]*8.0; }//end else}//end function //-------------------------------------------//public double f3(double x){ int index = (int)Math.round(x);if(index<0 || index>mag3.length-1){ return 0;}else{ return mag3[index]*4.0; }//end else}//end function //-------------------------------------------//public double f4(double x){ int index = (int)Math.round(x);if(index<0 || index>mag4.length-1){ return 0;}else{ return mag4[index]*2.0; }//end else}//end function //-------------------------------------------//public double f5(double x){ int index = (int)Math.round(x);if(index<0 || index>mag5.length-1){ return 0;}else{ return mag5[index]*1.0; }//end else}//end function }//end sample class Dsp031

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Digital signal processing - dsp. OpenStax CNX. Jan 06, 2016 Download for free at https://legacy.cnx.org/content/col11642/1.38
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Digital signal processing - dsp' conversation and receive update notifications?

Ask