<< Chapter < Page Chapter >> Page >

Individual solar cells are connected electrically in modules to meet electrical-energy needs. They can be wired together in series or in parallel—connected like the batteries discussed earlier. A solar-cell array or module usually consists of between 36 and 72 cells, with a power output of 50 W to 140 W.

The output of the solar cells is direct current. For most uses in a home, AC is required, so a device called an inverter must be used to convert the DC to AC. Any extra output can then be passed on to the outside electrical grid for sale to the utility.

Take-home experiment: virtual solar cells

One can assemble a “virtual” solar cell array by using playing cards, or business or index cards, to represent a solar cell. Combinations of these cards in series and/or parallel can model the required array output. Assume each card has an output of 0.5 V and a current (under bright light) of 2 A. Using your cards, how would you arrange them to produce an output of 6 A at 3 V (18 W)?

Suppose you were told that you needed only 18 W (but no required voltage). Would you need more cards to make this arrangement?

Section summary

  • All voltage sources have two fundamental parts—a source of electrical energy that has a characteristic electromotive force (emf), and an internal resistance r size 12{r} {} .
  • The emf is the potential difference of a source when no current is flowing.
  • The numerical value of the emf depends on the source of potential difference.
  • The internal resistance r size 12{r} {} of a voltage source affects the output voltage when a current flows.
  • The voltage output of a device is called its terminal voltage V size 12{V} {} and is given by V = emf Ir size 12{V="emf" - ital "Ir"} {} , where I size 12{I} {} is the electric current and is positive when flowing away from the positive terminal of the voltage source.
  • When multiple voltage sources are in series, their internal resistances add and their emfs add algebraically.
  • Solar cells can be wired in series or parallel to provide increased voltage or current, respectively.

Conceptual questions

Is every emf a potential difference? Is every potential difference an emf? Explain.

Explain which battery is doing the charging and which is being charged in [link] .

The diagram shows two cells of e m f script E sub one equals twelve volts and internal resistance r sub one equals one ohm, and e m f script E sub two equals eighteen volts and internal resistance r sub two equals zero point five ohms, connected. The cells are connected with their positive terminals facing each other in a closed circuit.

Given a battery, an assortment of resistors, and a variety of voltage and current measuring devices, describe how you would determine the internal resistance of the battery.

Two different 12-V automobile batteries on a store shelf are rated at 600 and 850 “cold cranking amps.” Which has the smallest internal resistance?

What are the advantages and disadvantages of connecting batteries in series? In parallel?

Semitractor trucks use four large 12-V batteries. The starter system requires 24 V, while normal operation of the truck’s other electrical components utilizes 12 V. How could the four batteries be connected to produce 24 V? To produce 12 V? Why is 24 V better than 12 V for starting the truck’s engine (a very heavy load)?

Problem exercises

Standard automobile batteries have six lead-acid cells in series, creating a total emf of 12.0 V. What is the emf of an individual lead-acid cell?

2.00 V

Practice Key Terms 4

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics ii. OpenStax CNX. Nov 29, 2012 Download for free at http://legacy.cnx.org/content/col11458/1.2
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics ii' conversation and receive update notifications?

Ask