<< Chapter < Page Chapter >> Page >

Learning objectives

By the end of this section, you will be able to:

  • Explain how an object must be displaced for a force on it to do work.
  • Explain how relative directions of force and displacement of an object determine whether the work done on the object is positive, negative, or zero.

The information presented in this section supports the following AP® learning objectives and science practices:

  • 5.B.5.1 The student is able to design an experiment and analyze data to examine how a force exerted on an object or system does work on the object or system as it moves through a distance. (S.P. 4.2, 5.1)
  • 5.B.5.2 The student is able to design an experiment and analyze graphical data in which interpretations of the area under a force-distance curve are needed to determine the work done on or by the object or system. (S.P. 4.5, 5.1)
  • 5.B.5.3 The student is able to predict and calculate from graphical data the energy transfer to or work done on an object or system from information about a force exerted on the object or system through a distance. (S.P. 1.5, 2.2, 6.4)

What it means to do work

The scientific definition of work differs in some ways from its everyday meaning. Certain things we think of as hard work, such as writing an exam or carrying a heavy load on level ground, are not work as defined by a scientist. The scientific definition of work reveals its relationship to energy—whenever work is done, energy is transferred.

For work, in the scientific sense, to be done on an object, a force must be exerted on that object and there must be displacement of that object in the direction of the force.

Formally, the work    done on a system by a constant force is defined to be the product of the component of the force in the direction of motion and the distance through which the force acts . For a constant force, this is expressed in equation form as

W = F cos θ d , size 12{W= lline F rline left ("cos"θ right ) lline d rline } {}

where W size 12{W} {} is work, d size 12{d} {} is the displacement of the system, and θ size 12{θ} {} is the angle between the force vector F size 12{F} {} and the displacement vector d size 12{d} {} , as in [link] . We can also write this as

W = Fd cos θ . size 12{W= ital "Fd"" cos"θ} {}

To find the work done on a system that undergoes motion that is not one-way or that is in two or three dimensions, we divide the motion into one-way one-dimensional segments and add up the work done over each segment.

What is work?

The work done on a system by a constant force is the product of the component of the force in the direction of motion times the distance through which the force acts . For one-way motion in one dimension, this is expressed in equation form as

W = Fd cos θ , size 12{W= ital "Fd"" cos"θ} {}

where W size 12{W} {} is work, F size 12{F} {} is the magnitude of the force on the system, d size 12{d} {} is the magnitude of the displacement of the system, and θ size 12{q} {} is the angle between the force vector F size 12{F} {} and the displacement vector d size 12{d} {} .

Five drawings labeled a through e. In (a), person pushing a lawn mower with a force F. Force is represented by a vector making an angle theta with the horizontal and displacement of the mower is represented by vector d. The component of vector F along vector d is F cosine theta. Work done by the person W is equal to F d cosine theta. (b) A person is standing with a briefcase in his hand. The force F shown by a vector arrow pointing upwards starting from the handle of briefcase and the displacement d is equal to zero. (c) A person is walking holding the briefcase in his hand. Force vector F is in the vertical direction starting from the handle of briefcase and displacement vector d is in horizontal direction starting from the same point as vector F. The angle between F and d theta is equal to 90 degrees. Cosine theta is equal to zero. (d) A briefcase is shown in front of a set of stairs. A vector d starting from the first stair points along the incline of the stair and a force vector F is in vertical direction starting from the same point as vector d. The angle between them is theta. A component of vector F along vector d is F d cosine theta. (e) A briefcase is shown lowered vertically down from an electric generator. The displacement vector d points downwards and force vector F points upwards acting on the briefcase.
Examples of work. (a) The work done by the force F size 12{F} {} on this lawn mower is Fd cos θ size 12{ ital "Fd""cos"θ} {} . Note that F cos θ size 12{F"cos"θ} {} is the component of the force in the direction of motion. (b) A person holding a briefcase does no work on it, because there is no displacement. No energy is transferred to or from the briefcase. (c) The person moving the briefcase horizontally at a constant speed does no work on it, and transfers no energy to it. (d) Work is done on the briefcase by carrying it up stairs at constant speed, because there is necessarily a component of force F size 12{F} {} in the direction of the motion. Energy is transferred to the briefcase and could in turn be used to do work. (e) When the briefcase is lowered, energy is transferred out of the briefcase and into an electric generator. Here the work done on the briefcase by the generator is negative, removing energy from the briefcase, because F size 12{F} {} and d size 12{d} {} are in opposite directions.
Practice Key Terms 3

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Work and energy. OpenStax CNX. Nov 09, 2015 Download for free at http://legacy.cnx.org/content/col11902/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Work and energy' conversation and receive update notifications?

Ask