<< Chapter < Page Chapter >> Page >

Travels with my ant: the curtate and prolate cycloids

Earlier in this section, we looked at the parametric equations for a cycloid, which is the path a point on the edge of a wheel traces as the wheel rolls along a straight path. In this project we look at two different variations of the cycloid, called the curtate and prolate cycloids.

First, let’s revisit the derivation of the parametric equations for a cycloid. Recall that we considered a tenacious ant trying to get home by hanging onto the edge of a bicycle tire. We have assumed the ant climbed onto the tire at the very edge, where the tire touches the ground. As the wheel rolls, the ant moves with the edge of the tire ( [link] ).

As we have discussed, we have a lot of flexibility when parameterizing a curve. In this case we let our parameter t represent the angle the tire has rotated through. Looking at [link] , we see that after the tire has rotated through an angle of t , the position of the center of the wheel, C = ( x C , y C ) , is given by

x C = a t and y C = a .

Furthermore, letting A = ( x A , y A ) denote the position of the ant, we note that

x C x A = a sin t and y C y A = a cos t .

Then

x A = x C a sin t = a t a sin t = a ( t sin t ) y A = y C a cos t = a a cos t = a ( 1 cos t ) .
There are two figures marked (a) and (b). Figure a has a circle with point A on the circle at the origin. The circle has “spokes,” with point A being at the end of one of these spokes. The circle appears to be travelling to the right on the x axis, with point A being up above the x axis in a second image of the circle drawn slightly to the right. Figure b has a circle in the first quadrant with center C. It touches the x axis at xc. A point A is drawn on the circle and a right triangle is made from this point and point C. The hypotenuse is marked a and the angle at C between A and xc is marked t. Lines are drawn to give the x and y values of A as xA and yA, respectively. Similarly, a line is drawn to give the y value of C as yC.
(a) The ant clings to the edge of the bicycle tire as the tire rolls along the ground. (b) Using geometry to determine the position of the ant after the tire has rotated through an angle of t .

Note that these are the same parametric representations we had before, but we have now assigned a physical meaning to the parametric variable t .

After a while the ant is getting dizzy from going round and round on the edge of the tire. So he climbs up one of the spokes toward the center of the wheel. By climbing toward the center of the wheel, the ant has changed his path of motion. The new path has less up-and-down motion and is called a curtate cycloid ( [link] ). As shown in the figure, we let b denote the distance along the spoke from the center of the wheel to the ant. As before, we let t represent the angle the tire has rotated through. Additionally, we let C = ( x C , y C ) represent the position of the center of the wheel and A = ( x A , y A ) represent the position of the ant.

There are three figures marked (a), (b), and (c). Figure a has a circle with “spokes,” where point A is in the middle of one of these spokes. The circle is tangent to the x axis at the origin. The circle appears to be travelling to the right on the x axis, with point A being higher up in a second image of the circle drawn slightly to the right. Figure b shows the curve that point A would trace out, as the circle travels to the right. It is vaguely sinusoidal. Figure c has a circle in the first quadrant with center C. It touches the x axis at xc. A point A is drawn inside the circle and a right triangle is made from this point and point C. The hypotenuse is marked b, the angle at C between A and xc is marked t, and the distance from C to xc is marked a. Lines are drawn to give the x and y values of A as xA and yA, respectively. Similarly, a line is drawn to give the y value of C as yC.
(a) The ant climbs up one of the spokes toward the center of the wheel. (b) The ant’s path of motion after he climbs closer to the center of the wheel. This is called a curtate cycloid. (c) The new setup, now that the ant has moved closer to the center of the wheel.
  1. What is the position of the center of the wheel after the tire has rotated through an angle of t ?
  2. Use geometry to find expressions for x C x A and for y C y A .
  3. On the basis of your answers to parts 1 and 2, what are the parametric equations representing the curtate cycloid?
    Once the ant’s head clears, he realizes that the bicyclist has made a turn, and is now traveling away from his home. So he drops off the bicycle tire and looks around. Fortunately, there is a set of train tracks nearby, headed back in the right direction. So the ant heads over to the train tracks to wait. After a while, a train goes by, heading in the right direction, and he manages to jump up and just catch the edge of the train wheel (without getting squished!).
    The ant is still worried about getting dizzy, but the train wheel is slippery and has no spokes to climb, so he decides to just hang on to the edge of the wheel and hope for the best. Now, train wheels have a flange to keep the wheel running on the tracks. So, in this case, since the ant is hanging on to the very edge of the flange, the distance from the center of the wheel to the ant is actually greater than the radius of the wheel ( [link] ).
    The setup here is essentially the same as when the ant climbed up the spoke on the bicycle wheel. We let b denote the distance from the center of the wheel to the ant, and we let t represent the angle the tire has rotated through. Additionally, we let C = ( x C , y C ) represent the position of the center of the wheel and A = ( x A , y A ) represent the position of the ant ( [link] ).
    When the distance from the center of the wheel to the ant is greater than the radius of the wheel, his path of motion is called a prolate cycloid . A graph of a prolate cycloid is shown in the figure.
    There are three figures marked (a), (b), and (c). Figure a has a circle and a point A that is outside the circle on the y axis (below the origin). The circle is tangent to the x axis at the origin. The circle appears to be travelling to the right on the x axis, with point A being above the x axis in a second image of the circle drawn slightly to the right. Figure b has a circle in the first quadrant with center C. It touches the x axis at xc. A point A is drawn outside the circle and a right triangle is made from this point and point C. The hypotenuse is marked b, the angle at C between A and xc is marked t, and the distance from C to xc is marked a. Lines are drawn to give the x and y values of A as xA and yA, respectively. Similarly, a line is drawn to give the y value of C as yC. Figure c shows the curve that point A would trace out, as the circle travels to the right. It is vaguely sinusoidal with an extra loop at the bottom once per revolution.
    (a) The ant is hanging onto the flange of the train wheel. (b) The new setup, now that the ant has jumped onto the train wheel. (c) The ant travels along a prolate cycloid.
  4. Using the same approach you used in parts 1– 3, find the parametric equations for the path of motion of the ant.
  5. What do you notice about your answer to part 3 and your answer to part 4?
    Notice that the ant is actually traveling backward at times (the “loops” in the graph), even though the train continues to move forward. He is probably going to be really dizzy by the time he gets home!
Practice Key Terms 7

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Calculus volume 3. OpenStax CNX. Feb 05, 2016 Download for free at http://legacy.cnx.org/content/col11966/1.2
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Calculus volume 3' conversation and receive update notifications?

Ask