<< Chapter < Page Chapter >> Page >
Introduces the decibel scale and shows typical calculations for signal processing applications.

Introduction

The concept of decibel originates from telephone engineers who were working with power loss in a telephoneline consisting of cascaded circuits. The power loss in each circuit is the ratio of the power in to the power out, or equivivalently, the power gain isthe ratio of the power out to the power in.

Let P in be the power input to a telephone line and P out the power out. The power gain is then given by

Gain P out P in
Taking the logarithm of the gain formula we obtain acomparative measure called Bel.
Gain Bel 10 logbase --> P out P in
This measure is in honour of Alexander G. Bell, see .

Alexander G. Bell

Decibel

Bel is often a to large quantity, so we define a more useful measure, decibel:

Gain dB 10 10 logbase --> P out P in
Please note from the definition that the gain in dB is relative to the input power.In general we define:
Number of decibels 10 10 logbase --> P P ref

If no reference level is given it is customary to use P ref 1 W , in which case we have:

Number of decibels 10 10 logbase --> P

Given the power spectrum density (psd) function of a signal x n , S xx f . Express the magnitude of the psd in decibels.

We find S xx dB 10 10 logbase --> S xx f .

More about decibels

Above we’ve calculated the decibel equivalent of power. Power is a quadratic variable, whereas voltageand current are linear variables. This can be seen, for example, from the formulas P V 2 R and P I 2 R .

So if we want to find the decibel value of a current or voltage, or more general an amplitude we use:

Amplitude dB 20 10 logbase --> Amplitude Amplitude ref
This is illustrated in the following example.

Express the magnitude of the filter H f in dB scale.

The magnitude is given by H f ,which gives: H dB 20 10 logbase --> H f .

Plots of the magnitude of an example filter H f and its decibel equivalent are shown in .

Magnitude responses.

Some basic arithmetic

The ratios 1,10,100, 1000 give dB values 0 dB, 10 dB, 20 dB and 30 dB respectively. This implies that an increaseof 10 dB corresponds to a ratio increase by a factor 10.

This can easily be shown: Given a ratio R we have R[dB]= 10 log R. Increasing the ratio by a factor of 10 we have: 10 log (10*R) = 10 log 10 + 10 log R = 10 dB + R dB.

Another important dB-value is 3dB. This comes from the fact that:

An increase by a factor 2 gives: an increase of 10 log 2≈3 dB. A“increase”by a factor 1/2 gives: an“increase”of 10 log 1/2≈-3 dB.

In filter terminology the cut-off frequency is a term that often appears. The cutoff frequency (for lowpass and highpass filters ), f c , is the frequency at which the squared magnitude response in dB is½. In decibel scale this corresponds to about -3 dB.

Decibels in linear systems

In signal processing we have the following relations for linear systems:

Y f H f X f
where X and H denotes the input signal and the filter respectively. Taking absolute values on both sides of and converting to decibels we get:
The output amplitude at a given frequency is simply given by the sum of the filter gain andthe input amplitude, both in dB.

Other references:

Above we have used P ref 1 W as a reference and obtained the standard dB measure. In some applications it is moreuseful to use P ref 1 mW and we then have the dBm measure.

Another example is when calculating the gain of different antennas. Then it is customary to use an isotropic(equal radiation in all directions) antenna as a reference. So for a given antenna we can use the dBi measure. (i ->isotropic)

Matlab files

filter_example.m

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Signal and information processing for sonar. OpenStax CNX. Dec 04, 2007 Download for free at http://cnx.org/content/col10422/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Signal and information processing for sonar' conversation and receive update notifications?

Ask