<< Chapter < Page Chapter >> Page >

Electrolysis can be used for purifying a metal through the electrolytic dissolution of an impure anode and the subsequent re-crystallization of the pure metal on the cathode. The impurities are left behind in solution. Copper is refined commercially by this electrolytic technique.

Electrolysis is often used for electroplating a metal to another material acting as the cathode. The other material must also be electrically conducting. Non-conducting materials, such as leaves, can also be plated by first being painted with a metallic conductive paint. Silver plating can be done with a silver anode and the object to be plated as the cathode.

Electrolytic reduction (cathodic reduction) has developed into a useful technique for the restoration of artifacts such as corroded nails and encrusted silver. In the case of silver, the degradation is usually due to the surface formation of insoluble (black) silver sulfide ( Ag 2 S size 12{"Ag" rSub { size 8{2} } S} {} ). The artifact (a silver coin, for example) is attached to the negative electrode of the electrolysis cell. The Ag + size 12{"Ag" rSup { size 8{+{}} } } {} ions of the silver sulfide pick up electrons and are converted back to metallic silver:

Ag 2 S ( s ) + 2e 2Ag ( s ) + S 2 ( aq ) size 12{"Ag" rSub { size 8{2} } S \( s \) +"2e" rSup { size 8{ - {}} } rightarrow "2Ag" \( s \) +S rSup { size 8{2 - {}} } \( "aq" \) } {}

 The sulfide ions are swept away by the water and the surface of the object is restored.

In this experiment, you will electroplate copper quantitatively to a copper cathode (the anode is also composed of copper). The current is measured over an interval of approximately one hour so that the amount of charge passing through the cell is known. The molar mass of copper is calculated from its equivalent mass using Faraday’s second law. In the second part of the experiment, you will use turn copper into gold!

Background information

In the 1830s, Michael Faraday published his experiments using the recently discovered voltaic column to decompose substances through the use of electric current. Electrolysis is an oxidation-reduction process involving a conversion of electrical energy to chemical energy. The electrolytic cell is a galvanic cell operating in reverse. The automobile battery is acts as a collection of galvanic cells when delivering electric current, but acts as a collection of electrolytic cells when being recharged.

Faraday first described the quantitative relationships between the amount of electric charge (number of electrons) that has passed through an electrolytic cell and the amount of materials that have formed at the electrodes. These are summarized as Faraday’s Laws of Electrolysis: 

  • The mass of substance reacting at an electrode is directly proportional to the total amount of electric charge that has passed through the cell.
  • The masses of the substances reacting at the electrodes are in direct ratio to their equivalent masses. The equivalent mass of a reacting substance is defined as its mass that reacts with one mole of electrons in the oxidation or reduction process. In the case of sodium and chlorine, the equivalent masses of the sodium and chlorine are equal to their molar masses; the equivalent mass of copper is equal to its molar mass divided by two. The second law is a consequence of the stoichiometry of the balanced half-reactions.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Gen chem lab. OpenStax CNX. Oct 12, 2009 Download for free at http://cnx.org/content/col10452/1.51
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Gen chem lab' conversation and receive update notifications?

Ask