<< Chapter < Page Chapter >> Page >

By the end of this section, you will be able to:

  • Explain how special interest groups and lobbyists can influence campaigns and elections
  • Describe pork-barrel spending and logrolling

Many political issues are of intense interest to a relatively small group, as noted above. For example, many U.S. drivers do not much care where the tires for their car were made—they just want good quality as inexpensively as they can get it. In September 2009, President Obama and Congress enacted a tariff (taxes added on imported goods) on tires imported from China that would increase the import price of Chinese tires by 35 percent in its first year, 30 percent in its second year, and 25 percent in its third year. Interestingly, the U.S. companies that make tires did not favor this step, because most of them also import tires from China and other countries. (See Globalization and Protectionism for more on tariffs.) However, the United Steelworkers union, which had seen jobs in the tire industry fall by 5,000 over the previous five years, lobbied fiercely for the tariff to be enacted. With this tariff, the cost of all tires increased significantly. (See the closing Bring It Home feature at the end of this chapter for more information on the tire tariff.)

Special interest groups are groups that are small in number relative to the nation, but quite well organized and focused on a specific issue. A special interest group can pressure legislators to enact public policies that do not benefit society as a whole. Imagine an environmental rule to reduce air pollution that will cost 10 large companies $8 million each, for a total cost of $80 million. The social benefits from enacting this rule provide an average benefit of $10 for every person in the United States, for a total of about $3 trillion. Even though the benefits are far higher than the costs for society as a whole, the 10 companies are likely to lobby much more fiercely to avoid $8 million in costs than the average person is to argue for $10 worth of benefits.

As this example suggests, we can relate the problem of special interests in politics to an issue raised in Environmental Protection and Negative Externalities about economic policy with respect to negative externalities and pollution—the problem called regulatory capture    (which we defined in Monopoly and Antitrust Policy ). In legislative bodies and agencies that write laws and regulations about how much corporations will pay in taxes, or rules for safety in the workplace, or instructions on how to satisfy environmental regulations, you can be sure the specific industry affected has lobbyists who study every word and every comma. They talk with the legislators who are writing the legislation and suggest alternative wording. They contribute to the campaigns of legislators on the key committees—and may even offer those legislators high-paying jobs after they have left office. As a result, it often turns out that those who are being regulated can exercise considerable influence over the regulators.

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Principles of economics. OpenStax CNX. Sep 19, 2014 Download for free at http://legacy.cnx.org/content/col11613/1.11
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Principles of economics' conversation and receive update notifications?

Ask