# 2.1 Waves

 Page 1 / 1
The wave equation and some basic properties of its solution are given

## The wave equation

In deriving the motion of a string under tension we came up with an equation:

$\frac{{\partial }^{2}y}{\partial {x}^{2}}=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}y}{\partial {t}^{2}}$ which is known as the wave equation. We will show that this leads to waves below, but first, let us note the fact that solutions of this equation can beadded to give additional solutions.

Say you have two waves governed by two equations Since they are traveling in the same medium, ${\text{v}}$ is the same $\frac{{\partial }^{2}{f}_{1}}{\partial {x}^{2}}=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}{f}_{1}}{\partial {t}^{2}}$ $\frac{{\partial }^{2}{f}_{2}}{\partial {x}^{2}}=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}{f}_{2}}{\partial {t}^{2}}$ add these $\frac{{\partial }^{2}{f}_{1}}{\partial {x}^{2}}+\frac{{\partial }^{2}{f}_{2}}{\partial {x}^{2}}=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}{f}_{1}}{\partial {t}^{2}}+\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}{f}_{2}}{\partial {t}^{2}}$ $\frac{{\partial }^{2}}{\partial {x}^{2}}\left({f}_{1}+{f}_{2}\right)=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}}{\partial {t}^{2}}\left({f}_{1}+{f}_{2}\right)$ Thus ${f}_{1}+{f}_{2}$ is a solution to the wave equation

Lets say we have two functions, ${f}_{1}\left(x-{\text{v}}t\right)$ and ${f}_{2}\left(x+{\text{v}}t\right)$ . Each of these functions individually satisfy the wave equation. note that $y={f}_{1}\left(x-{\text{v}}t\right)+{f}_{2}\left(x+{\text{v}}t\right)$ will also satisfy the wave equation. In fact any number of functions of the form $f\left(x-{\text{v}}t\right)$ or $f\left(x+{\text{v}}t\right)$ can be added together and will satisfy the wave equation. This is a very profound property of waves. For example it will allow us to describe a verycomplex wave form, as the summation of simpler wave forms. The fact that waves add is a consequence of the fact that the wave equation $\frac{{\partial }^{2}f}{\partial {x}^{2}}=\frac{1}{{{\text{v}}}^{2}}\frac{{\partial }^{2}f}{\partial {t}^{2}}$ is linear, that is $f$ and its derivatives only appear to first order. Thus any linear combination of solutions of the equation is itself a solution to the equation.

## General form

Any well behaved (ie. no discontinuities, differentiable) function of the form $y=f\left(x-{\text{v}}t\right)$ is a solution to the wave equation. Lets define ${f}^{\prime }\left(a\right)=\frac{df}{da}$ and ${f}^{\prime \prime }\left(a\right)=\frac{{d}^{2}f}{d{a}^{2}}\text{.}$ Then using the chain rule $\begin{array}{c}\frac{\partial y}{\partial x}=\frac{\partial f}{\partial \left(x-{\text{v}}t\right)}\frac{\partial \left(x-{\text{v}}t\right)}{\partial x}\\ =\frac{\partial f}{\partial \left(x-{\text{v}}t\right)}={f}^{\prime }\left(x-{\text{v}}t\right)\text{,}\end{array}$ and $\frac{{\partial }^{2}y}{\partial {x}^{2}}={f}^{\prime \prime }\left(x-{\text{v}}t\right)\text{.}$ Also $\begin{array}{c}\frac{\partial y}{\partial t}=\frac{\partial f}{\partial \left(x-{\text{v}}t\right)}\frac{\partial \left(x-{\text{v}}t\right)}{\partial t}\\ =-{\text{v}}\frac{\partial f}{\partial \left(x-{\text{v}}t\right)}\\ =-{\text{v}}{f}^{\prime }\left(x-{\text{v}}t\right)\end{array}$ $\frac{{\partial }^{2}y}{\partial {t}^{2}}={{\text{v}}}^{2}{f}^{\prime \prime }\left(x-{\text{v}}t\right)\text{.}$ We see that this satisfies the wave equation.

Lets take the example of a Gaussian pulse. $f\left(x-{\text{v}}t\right)=A{e}^{-{\left(x-{\text{v}}t\right)}^{2}/2{\sigma }^{2}}$

Then $\frac{\partial f}{\partial x}=\frac{-2\left(x-{\text{v}}t\right)}{2{\sigma }^{2}}A{e}^{-{\left(x-{\text{v}}t\right)}^{2}/2{\sigma }^{2}}$ 

and $\frac{\partial f}{\partial t}=\frac{-2\left(x-{\text{v}}t\right)\left(-{\text{v}}\right)}{2{\sigma }^{2}}A{e}^{-{\left(x-{\text{v}}t\right)}^{2}/2{\sigma }^{2}}$  or $\frac{{\partial }^{2}f\left(x-{\text{v}}t\right)}{\partial {t}^{2}}={{\text{v}}}^{2}\frac{{\partial }^{2}f\left(x-{\text{v}}t\right)}{\partial {x}^{2}}$ That is it satisfies the wave equation.

## The velocity of a wave

To find the velocity of a wave, consider the wave: $y\left(x,t\right)=f\left(x-{\text{v}}t\right)$ Then can see that if you increase time and x by $\Delta t$ and $\Delta x$ for a point on the traveling wave of constant amplitude $f\left(x-{\text{v}}t\right)=f\left(\left(x+\Delta x\right)-{\text{v}}\left(t+\Delta t\right)\right)\text{.}$ Which is true if $\Delta x-{\text{v}}\Delta t=0$ or ${\text{v}}=\frac{\Delta x}{\Delta t}$ Thus $f\left(x-{\text{v}}t\right)$ describes a wave that is moving in the positive $x$ direction. Likewise $f\left(x+{\text{v}}t\right)$ describes a wave moving in the negative x direction.

Lots of students get this backwards so watch out!

Another way to picture this is to consider a one dimensional wave pulse of arbitrary shape, described by ${y}^{\prime }=f\left({x}^{\prime }\right)$ , fixed to a coordinate system ${O}^{\prime }\left({x}^{\prime },{y}^{\prime }\right)$

Now let the ${O}^{\prime }$ system, together with the pulse, move to the right along the x-axis at uniform speed v relative to a fixed coordinate system $O\left(x,y\right)$ . As it moves, the pulse is assumed to maintain its shape. Any point P on the pulsecan be described by either of two coordinates $x$ or ${x}^{\prime }$ , where ${x}^{\prime }=x-{\text{v}}t$ . The $y$ coordinate is identical in either system. In the stationary coordinate system's frame of reference, the moving pulse has the mathematical form $y={y}^{\prime }=f\left({x}^{\prime }\right)=f\left(x-{\text{v}}t\right)$ If the pulse moves to the left, the sign of v must be reversed, so that we maywrite $y=f\left(x±{\text{v}}t\right)$ as the general form of a traveling wave. Notice that we have assumed $x={x}^{\prime }$ at $t=0$ .

Waves carry momentum, energy (possibly angular momentum) but not matter

## Wavelength, wavenumber etc.

We will often use a sinusoidal form for the wave. However we can't use $y=A{\mathrm{sin}}\left(x-{\text{v}}t\right)$ since the part in brackets has dimensions of length. Instead we use $y=A{\mathrm{sin}}\frac{2\pi }{\lambda }\left(x-{\text{v}}t\right)\text{.}$ Notice that $y\left(x=0,t\right)=y\left(x=\lambda ,t\right)$ which gives us the definition of the wavelength $\lambda$ .

Also note that the frequency is $\nu =\frac{{\text{v}}}{\lambda }\text{.}$ The angular frequency is defined to be $\omega \equiv 2\pi \nu =\frac{2\pi {\text{v}}}{\lambda }\text{.}$ Finally the wave number is $k\equiv \frac{2\pi }{\lambda }\text{.}$ So we could have written our wave as $y=A{\mathrm{sin}}\left(kx-\omega t\right)$ Note that some books say $k=\frac{1}{\lambda }$

## Normal modes on a string as an example of wave addition

Lets go back to our solution for normal modes on a string: ${y}_{n}\left(x,t\right)={A}_{n}{\mathrm{sin}}\left(\frac{2\pi x}{{\lambda }_{n}}\right){\mathrm{cos}}{\omega }_{n}t$ ${y}_{n}\left(x,t\right)={A}_{n}{\mathrm{sin}}\left(\frac{2\pi x}{{\lambda }_{n}}\right){\mathrm{cos}}\left(\frac{2\pi }{{\lambda }_{n}}{\text{v}}t\right)\text{.}$ Now lets do the following: make use of ${\mathrm{sin}}\left(\theta +\phi \right)+{\mathrm{sin}}\left(\theta -\phi \right)=2{\mathrm{sin}}\theta {\mathrm{cos}}\phi$ Also lets just take the first normal mode and drop the n's Finally, define $A\equiv {A}_{1}/2$ Then $y\left(x,t\right)=2A{\mathrm{sin}}\left(\frac{2\pi x}{\lambda }\right){\mathrm{cos}}\left(\frac{2\pi }{\lambda }{\text{v}}t\right)$ becomes $y\left(x,t\right)=A{\mathrm{sin}}\left[\frac{2\pi }{\lambda }\left(x-{\text{v}}t\right)\right]+A{\mathrm{sin}}\left[\frac{2\pi }{\lambda }\left(x+{\text{v}}t\right)\right]$ These are two waves of equal amplitude and speed traveling in opposite directions.We can plot what happens when we do this. The following animation was made with Mathematica using the command

do you think it's worthwhile in the long term to study the effects and possibilities of nanotechnology on viral treatment?
absolutely yes
Daniel
how to know photocatalytic properties of tio2 nanoparticles...what to do now
it is a goid question and i want to know the answer as well
Maciej
Abigail
Do somebody tell me a best nano engineering book for beginners?
what is fullerene does it is used to make bukky balls
are you nano engineer ?
s.
fullerene is a bucky ball aka Carbon 60 molecule. It was name by the architect Fuller. He design the geodesic dome. it resembles a soccer ball.
Tarell
what is the actual application of fullerenes nowadays?
Damian
That is a great question Damian. best way to answer that question is to Google it. there are hundreds of applications for buck minister fullerenes, from medical to aerospace. you can also find plenty of research papers that will give you great detail on the potential applications of fullerenes.
Tarell
what is the Synthesis, properties,and applications of carbon nano chemistry
Mostly, they use nano carbon for electronics and for materials to be strengthened.
Virgil
is Bucky paper clear?
CYNTHIA
so some one know about replacing silicon atom with phosphorous in semiconductors device?
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
Do you know which machine is used to that process?
s.
how to fabricate graphene ink ?
for screen printed electrodes ?
SUYASH
What is lattice structure?
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
what's the easiest and fastest way to the synthesize AgNP?
China
Cied
types of nano material
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
I'm interested in nanotube
Uday
what is nanomaterials​ and their applications of sensors.
what is nano technology
what is system testing?
preparation of nanomaterial
Yes, Nanotechnology has a very fast field of applications and their is always something new to do with it...
what is system testing
what is the application of nanotechnology?
Stotaw
In this morden time nanotechnology used in many field . 1-Electronics-manufacturad IC ,RAM,MRAM,solar panel etc 2-Helth and Medical-Nanomedicine,Drug Dilivery for cancer treatment etc 3- Atomobile -MEMS, Coating on car etc. and may other field for details you can check at Google
Azam
anybody can imagine what will be happen after 100 years from now in nano tech world
Prasenjit
after 100 year this will be not nanotechnology maybe this technology name will be change . maybe aftet 100 year . we work on electron lable practically about its properties and behaviour by the different instruments
Azam
name doesn't matter , whatever it will be change... I'm taking about effect on circumstances of the microscopic world
Prasenjit
how hard could it be to apply nanotechnology against viral infections such HIV or Ebola?
Damian
silver nanoparticles could handle the job?
Damian
not now but maybe in future only AgNP maybe any other nanomaterials
Azam
Hello
Uday
I'm interested in Nanotube
Uday
this technology will not going on for the long time , so I'm thinking about femtotechnology 10^-15
Prasenjit
how did you get the value of 2000N.What calculations are needed to arrive at it
Privacy Information Security Software Version 1.1a
Good
Berger describes sociologists as concerned with
Got questions? Join the online conversation and get instant answers!