# 1.3 Accuracy, precision, and significant figures  (Page 4/12)

 Page 4 / 12

When we express measured values, we can only list as many digits as we initially measured with our measuring tool. For example, if you use a standard ruler to measure the length of a stick, you may measure it to be $\text{36}\text{.}7\phantom{\rule{0.25em}{0ex}}\text{cm}$ . You could not express this value as $\text{36}\text{.}\text{71}\phantom{\rule{0.25em}{0ex}}\text{cm}$ because your measuring tool was not precise enough to measure a hundredth of a centimeter. It should be noted that the last digit in a measured value has been estimated in some way by the person performing the measurement. For example, the person measuring the length of a stick with a ruler notices that the stick length seems to be somewhere in between $\text{36}\text{.}6\phantom{\rule{0.25em}{0ex}}\text{cm}$ and $\text{36}\text{.}7\phantom{\rule{0.25em}{0ex}}\text{cm}$ , and he or she must estimate the value of the last digit. Using the method of significant figures    , the rule is that the last digit written down in a measurement is the first digit with some uncertainty . In order to determine the number of significant digits in a value, start with the first measured value at the left and count the number of digits through the last digit written on the right. For example, the measured value $\text{36}\text{.}7\phantom{\rule{0.25em}{0ex}}\text{cm}$ has three digits, or significant figures. Significant figures indicate the precision of a measuring tool that was used to measure a value.

## Zeros

Special consideration is given to zeros when counting significant figures. The zeros in 0.053 are not significant, because they are only placekeepers that locate the decimal point. There are two significant figures in 0.053. The zeros in 10.053 are not placekeepers but are significant—this number has five significant figures. The zeros in 1300 may or may not be significant depending on the style of writing numbers. They could mean the number is known to the last digit, or they could be placekeepers. So 1300 could have two, three, or four significant figures. (To avoid this ambiguity, write 1300 in scientific notation.) Zeros are significant except when they serve only as placekeepers .

Determine the number of significant figures in the following measurements:

1. 0.0009
2. 15,450.0
3. $6×{\text{10}}^{3}$
4. 87.990
5. 30.42

(a) 1; the zeros in this number are placekeepers that indicate the decimal point

(b) 6; here, the zeros indicate that a measurement was made to the 0.1 decimal point, so the zeros are significant

(c) 1; the value ${\text{10}}^{3}$ signifies the decimal place, not the number of measured values

(d) 5; the final zero indicates that a measurement was made to the 0.001 decimal point, so it is significant

(e) 4; any zeros located in between significant figures in a number are also significant

## Significant figures in calculations

When combining measurements with different degrees of accuracy and precision, the number of significant digits in the final answer can be no greater than the number of significant digits in the least precise measured value . There are two different rules, one for multiplication and division and the other for addition and subtraction, as discussed below.

1. For multiplication and division: The result should have the same number of significant figures as the quantity having the least significant figures entering into the calculation . For example, the area of a circle can be calculated from its radius using $A={\mathrm{\pi r}}^{2}$ . Let us see how many significant figures the area has if the radius has only two—say, $r=1\text{.}2\phantom{\rule{0.25em}{0ex}}\text{m}$ . Then,

Propose a force standard different from the example of a stretched spring discussed in the text. Your standard must be capable of producing the same force repeatedly.
What is meant by dielectric charge?
what happens to the size of charge if the dielectric is changed?
omega= omega not +alpha t derivation
u have to derivate it respected to time ...and as w is the angular velocity uu will relace it with "thita × time""
Abrar
do to be peaceful with any body
the angle subtended at the center of sphere of radius r in steradian is equal to 4 pi how?
if for diatonic gas Cv =5R/2 then gamma is equal to 7/5 how?
Saeed
define variable velocity
displacement in easy way.
binding energy per nucleon
why God created humanity
Because HE needs someone to dominate the earth (Gen. 1:26)
Olorunfemi
Ali
Is the object in a conductor or an insulator? Justify your answer. whats the answer to this question? pls need help figure is given above
ok we can say body is electrically neutral ...conductor this quality is given to most metalls who have free electron in orbital d ...but human doesn't have ...so we re made from insulator or dielectric material ... furthermore, the menirals in our body like k, Fe , cu , zn
Abrar
when we face electric shock these elements work as a conductor that's why we got this shock
Abrar
how do i calculate the pressure on the base of a deposit if the deposit is moving with a linear aceleration
why electromagnetic induction is not used in room heater ?
room?
Abrar
What is position?
What is law of gravition