<< Chapter < Page
  Xna game studio     Page 7 / 12
Chapter >> Page >

Listing 6 . Adjust column and row counters.

if(++spriteCol == spriteColLim){ //Column limit has been hit, reset the// column counter and increment the // funSequenceCnt.spriteCol = 0; funSequenceCnt++;

Execute the pause sequence if it is time for it

The last statement in Listing 6 increments the funSequenceCnt . The first statement in Listing 7 tests to see if it has a value of 5. If so, all five cycles of the fun sequence have been executed and the code in the body ofthe if statement that begins at the top of Listing 7 will be executed. The purpose of this code is to execute two cycles of the pausesequence.

Listing 7 . Execute the pause sequence if it is time for it.

if((funSequenceCnt == 5) || (spriteRow == 1)){ spriteRow = 1;//advance to second row//Increment the pause sequence counter. pauseSequenceCnt++;//After two cycles in the pause mode, reset // variables and start the overall cycle// again. if(pauseSequenceCnt == 3){spriteRow = 0; funSequenceCnt = 0;pauseSequenceCnt = 0; }//end if on pauseSequenceCnt}//end if on funSequenceCnt }//end if on spriteColLim in

The conditional clause

The conditional clause in the if statement at the top of Listing 7 also tests to see if the row counter is pointing to row 1. If so, this means that the pause cycle has already begun and should be continued. Therefore,the body of that if statement will be executed. In other words, the body of the if statement will be executed if the funSequenceCnt is equal to 5 or the spriteRow is equal to 1.

Set the row counter to 1

The first statement in the body of the if statement sets the row counter to 1. This is necessary because control may have just entered thebody of the if statement for the first time following completion of five cycles using the sprites in row 0 (the top row in Figure 1 ).

Increment the pauseSequenceCnt

Then Listing 7 increments the pauseSequenceCnt and compares it with the literal value 3. If there is a match, two cycles of animation usingthe sprite images in the bottom row of Figure 1 have been completed and it's time to return to the five cycles using the sprite images in the top row of Figure 1 .

To accomplish this, the row counter, the funSequenceCnt , and the pauseSequenceCnt are all set to 0. This will cause five cycles using the sprite images in the top row of Figure 1 to be executed before control will once again enter the code in Listing 7 .

Adjust sprite position and frame rate

The code that we have examined so far mainly deals with selecting the sprite image to draw each time the Draw method is called. We haven't dealt with the location where the sprite will be drawn in the game window, theorientation of the sprite when it is drawn, and the frame animation rate of fast versus slow .

Listing 8 adjusts these drawing parameters.

Listing 8 . Adjust sprite position and frame rate.

if((spriteRow == 0) || ((spriteRow == 1)&&(spriteCol == 0))) { msPerFrame = fast;spritePosition.X += frameWidth * scale / slide; }else if ((spriteRow == 1) || ((spriteRow == 0)&&(spriteCol == 0))){ //Stop and display images.msPerFrame = slow; }//end if-else

Questions & Answers

Do somebody tell me a best nano engineering book for beginners?
s. Reply
what is fullerene does it is used to make bukky balls
Devang Reply
are you nano engineer ?
s.
what is the Synthesis, properties,and applications of carbon nano chemistry
Abhijith Reply
so some one know about replacing silicon atom with phosphorous in semiconductors device?
s. Reply
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
how to fabricate graphene ink ?
SUYASH Reply
for screen printed electrodes ?
SUYASH
What is lattice structure?
s. Reply
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
Sanket Reply
what's the easiest and fastest way to the synthesize AgNP?
Damian Reply
China
Cied
types of nano material
abeetha Reply
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
I'm interested in nanotube
Uday
what is nanomaterials​ and their applications of sensors.
Ramkumar Reply
what is nano technology
Sravani Reply
what is system testing?
AMJAD
preparation of nanomaterial
Victor Reply
Yes, Nanotechnology has a very fast field of applications and their is always something new to do with it...
Himanshu Reply
good afternoon madam
AMJAD
what is system testing
AMJAD
what is the application of nanotechnology?
Stotaw
In this morden time nanotechnology used in many field . 1-Electronics-manufacturad IC ,RAM,MRAM,solar panel etc 2-Helth and Medical-Nanomedicine,Drug Dilivery for cancer treatment etc 3- Atomobile -MEMS, Coating on car etc. and may other field for details you can check at Google
Azam
anybody can imagine what will be happen after 100 years from now in nano tech world
Prasenjit
after 100 year this will be not nanotechnology maybe this technology name will be change . maybe aftet 100 year . we work on electron lable practically about its properties and behaviour by the different instruments
Azam
name doesn't matter , whatever it will be change... I'm taking about effect on circumstances of the microscopic world
Prasenjit
how hard could it be to apply nanotechnology against viral infections such HIV or Ebola?
Damian
silver nanoparticles could handle the job?
Damian
not now but maybe in future only AgNP maybe any other nanomaterials
Azam
Hello
Uday
I'm interested in Nanotube
Uday
this technology will not going on for the long time , so I'm thinking about femtotechnology 10^-15
Prasenjit
can nanotechnology change the direction of the face of the world
Prasenjit Reply
At high concentrations (>0.01 M), the relation between absorptivity coefficient and absorbance is no longer linear. This is due to the electrostatic interactions between the quantum dots in close proximity. If the concentration of the solution is high, another effect that is seen is the scattering of light from the large number of quantum dots. This assumption only works at low concentrations of the analyte. Presence of stray light.
Ali Reply
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
Got questions? Join the online conversation and get instant answers!
QuizOver.com Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, Xna game studio. OpenStax CNX. Feb 28, 2014 Download for free at https://legacy.cnx.org/content/col11634/1.6
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Xna game studio' conversation and receive update notifications?

Ask