<< Chapter < Page
  From matlab and simulink to real     Page 3 / 3
Chapter >> Page >
Data Type Conversion to 16-bit Integer

Setting the relational operator type

Double click on the “Relational Operator” block. Change the “Relational operator” to “==”. Click on the “Signal Data Types” tab.

Changing the Relational Operator

Setting the relational operator data type

Set the “Output data type mode” to “Boolean”.

Changing the Output Data Type

Joining the blocks

Move the blocks and join them as shown in the Figure below.

Joining the Blocks

Checking the dyadic analysis filter bank

Double click on the “Dyadic Analysis Filter Bank” block. The values of the Dyadic Analysis Filter Bank are shown below. You do not need to change them yet. Click on “OK”.

Checking the Dyadic Analysis Filter Bank

Checking the delay alignment

The delay alignment is shown below, with different delay times for the different frequencies.

Checking the Delay Alignment

Checking the soft threshold

The “Soft Threshold” sets the threshold below which noise is ignored for each of the four channels. Zero means no noise reduction.

Checking the Thresholds

Checking the dyadic synthesis

Double-click on the “Dyadic Synthesis Filter Bank”. There is no need to change the values at this time. Click on “OK” when done.

Checking the Dyadic Synthesis Filter Bank

Returning to the parent system

From the Toolbar, select the “Up Arrow” icon. This returns you to the next higher level.

Returning to the Parent System

Building the model

Selecting real-time workshop

Select Tools ->Real-Time Workshop ->Build Model.

Building the Model

The completed model running on code composer studio

From the folders on the left, select the source code for the project.

The Completed Model Running under Code Composer Studio

Different settings on the c6713 dsk

Microphone straight through to loudspeakers

To check out the microphone and loudspeakers, set the DIP switches on the C6713 DSK as follows:

Switch Position 0

The microphone is fed directly to the loudspeakers. There is no noise reduction.

Switch position for wavelet noise reduction

To run the “Wavelet Noise Reduction” subsystem, set the DIP switch to 1.

Switch Position 1 for Wavelet Noise Reduction

Modifying the model

The next stage is to modify the model. We will change the wavelet type to “Symlets”.

Changing the filter type

Double-click on the “Dyadic Analysis Filter Bank” block. Change the “Filter” field to “Symlets”. Click on “OK”.

Dyadic Analysis Filter Bank set to Symlets

Updating the dyadic synthesis filter bank

The wavelet type should be the same as that used in the Dyadic Analysis Filter Bank. Double-click on the “Dyadic Synthesis Filter Bank” block. Change the “Filter” field to “Symlets”. Click on “OK”.

Configuring the Dyadic Synthesis Filter Bank

Building the model

Select Tools ->Real-Time Workshop ->Build Model.

Building the Model

Running the updated model

Run the updated model and listen to the effect of using different filter types.

Some things to try

You may wish to experiment with different settings. Here are some suggestions.

Change the wavelet types

Inside the “Dyadic Analysis Filter Bank” are different wavelet types. Which are suitable for wavelet denoising and which are not? Note: you will also have to alter the values used in the “Dyadic Synthesis Filter Bank”.

Available Wavelet Types

Change the delay alignment times

Experiment with the delay alignment times. Try higher and lower values.

What is the effect of completely removing the “Delay Alignment” block?

Change the noise reduction thresholds

In the “Soft Threshold” block, change the values. The existing vector of [3, 2, 1, 0] reduces high frequency noise, but does not affect low frequencies.

Create your own subsystem

Add your own subsystem block controlled by the DIP switches and add your own wavelet denoising algorithm. Choose your own wavelet, number of channels, sampling frequency and thresholds.

Questions & Answers

can someone help me with some logarithmic and exponential equations.
Jeffrey Reply
sure. what is your question?
ninjadapaul
20/(×-6^2)
Salomon
okay, so you have 6 raised to the power of 2. what is that part of your answer
ninjadapaul
I don't understand what the A with approx sign and the boxed x mean
ninjadapaul
it think it's written 20/(X-6)^2 so it's 20 divided by X-6 squared
Salomon
I'm not sure why it wrote it the other way
Salomon
I got X =-6
Salomon
ok. so take the square root of both sides, now you have plus or minus the square root of 20= x-6
ninjadapaul
oops. ignore that.
ninjadapaul
so you not have an equal sign anywhere in the original equation?
ninjadapaul
Commplementary angles
Idrissa Reply
hello
Sherica
im all ears I need to learn
Sherica
right! what he said ⤴⤴⤴
Tamia
what is a good calculator for all algebra; would a Casio fx 260 work with all algebra equations? please name the cheapest, thanks.
Kevin Reply
a perfect square v²+2v+_
Dearan Reply
kkk nice
Abdirahman Reply
algebra 2 Inequalities:If equation 2 = 0 it is an open set?
Kim Reply
or infinite solutions?
Kim
The answer is neither. The function, 2 = 0 cannot exist. Hence, the function is undefined.
Al
y=10×
Embra Reply
if |A| not equal to 0 and order of A is n prove that adj (adj A = |A|
Nancy Reply
rolling four fair dice and getting an even number an all four dice
ramon Reply
Kristine 2*2*2=8
Bridget Reply
Differences Between Laspeyres and Paasche Indices
Emedobi Reply
No. 7x -4y is simplified from 4x + (3y + 3x) -7y
Mary Reply
is it 3×y ?
Joan Reply
J, combine like terms 7x-4y
Bridget Reply
im not good at math so would this help me
Rachael Reply
yes
Asali
I'm not good at math so would you help me
Samantha
what is the problem that i will help you to self with?
Asali
how do you translate this in Algebraic Expressions
linda Reply
Need to simplify the expresin. 3/7 (x+y)-1/7 (x-1)=
Crystal Reply
. After 3 months on a diet, Lisa had lost 12% of her original weight. She lost 21 pounds. What was Lisa's original weight?
Chris Reply
what's the easiest and fastest way to the synthesize AgNP?
Damian Reply
China
Cied
types of nano material
abeetha Reply
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
what is nanomaterials​ and their applications of sensors.
Ramkumar Reply
what is nano technology
Sravani Reply
what is system testing?
AMJAD
preparation of nanomaterial
Victor Reply
Yes, Nanotechnology has a very fast field of applications and their is always something new to do with it...
Himanshu Reply
good afternoon madam
AMJAD
what is system testing
AMJAD
what is the application of nanotechnology?
Stotaw
In this morden time nanotechnology used in many field . 1-Electronics-manufacturad IC ,RAM,MRAM,solar panel etc 2-Helth and Medical-Nanomedicine,Drug Dilivery for cancer treatment etc 3- Atomobile -MEMS, Coating on car etc. and may other field for details you can check at Google
Azam
anybody can imagine what will be happen after 100 years from now in nano tech world
Prasenjit
after 100 year this will be not nanotechnology maybe this technology name will be change . maybe aftet 100 year . we work on electron lable practically about its properties and behaviour by the different instruments
Azam
name doesn't matter , whatever it will be change... I'm taking about effect on circumstances of the microscopic world
Prasenjit
how hard could it be to apply nanotechnology against viral infections such HIV or Ebola?
Damian
silver nanoparticles could handle the job?
Damian
not now but maybe in future only AgNP maybe any other nanomaterials
Azam
can nanotechnology change the direction of the face of the world
Prasenjit Reply
At high concentrations (>0.01 M), the relation between absorptivity coefficient and absorbance is no longer linear. This is due to the electrostatic interactions between the quantum dots in close proximity. If the concentration of the solution is high, another effect that is seen is the scattering of light from the large number of quantum dots. This assumption only works at low concentrations of the analyte. Presence of stray light.
Ali Reply
the Beer law works very well for dilute solutions but fails for very high concentrations. why?
bamidele Reply
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
Got questions? Join the online conversation and get instant answers!
QuizOver.com Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, From matlab and simulink to real-time with ti dsp's. OpenStax CNX. Jun 08, 2009 Download for free at http://cnx.org/content/col10713/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'From matlab and simulink to real-time with ti dsp's' conversation and receive update notifications?

Ask