<< Chapter < Page Chapter >> Page >

Practice set a

Graph 3 x + y = 3 using the intercept method.

An xy coordinate plane with gridlines, labeled negative five and five on the both axes.

When x = 0 , y = 3 ; when y = 0 , x = 1

A graph of a line passing through two points with coordinates zero, three and one, zero.

Got questions? Get instant answers now!

Graphing using any two or more points

The graphs we have constructed so far have been done by finding two particular points, the intercepts. Actually, any two points will do. We chose to use the intercepts because they are usually the easiest to work with. In the next example, we will graph two equations using points other than the intercepts. We’ll use three points, the extra point serving as a check.

Sample set b

x 3 y = 10 .
We can find three points by choosing three x -values and computing to find the corresponding y -values . We’ll put our results in a table for ease of reading.

Since we are going to choose x -values and then compute to find the corresponding y -values , it will be to our advantage to solve the given equation for y .

x 3 y = 10 Subtract x from both sides . 3 y = x 10 Divide both sides by - 3. y = 1 3 x + 10 3

x y ( x , y )
1 If x = 1 , then y = 1 3 ( 1 ) + 10 3 = 1 3 + 10 3 = 11 3 ( 1 , 11 3 )
3 If x = 3 , then y = 1 3 ( 3 ) + 10 3 = 1 + 10 3 = 7 3 ( 3 , 7 3 )
3 If x = 3 , then y = 1 3 ( 3 ) + 10 3 = 1 + 10 3 = 13 3 ( 3 , 13 3 )

Thus, we have the three ordered pairs (points), ( 1 , 11 3 ) , ( 3 , 7 3 ) , ( 3 , 13 3 ) . If we wish, we can change the improper fractions to mixed numbers, ( 1 , 3 2 3 ) , ( 3 , 2 1 3 ) , ( 3 , 4 1 3 ) .

A graph of a line passing through three points with coordinates negative three, seven over three; one, eleven over three; and three, thirteen over three.

Got questions? Get instant answers now!

4 x + 4 y = 0

We solve for y .

4 y = 4 x y = x

x y ( x , y )
0 0 ( 0 , 0 )
2 2 ( 2 , 2 )
3 3 ( 3 , 3 )

A graph of a line passing through three points with coordinates negative three, three; zero, zero; and two, negative two.

Notice that the x and y -intercepts are the same point. Thus the intercept method does not provide enough information to construct this graph.

When an equation is given in the general form a x + b y = c , usually the most efficient approach to constructing the graph is to use the intercept method, when it works.

Got questions? Get instant answers now!

Practice set b

Graph the following equations.

Slanted, horizontal, and vertical lines

In all the graphs we have observed so far, the lines have been slanted. This will always be the case when both variables appear in the equation. If only one variable appears in the equation, then the line will be either vertical or horizontal. To see why, let’s consider a specific case:

Using the general form of a line, a x + b y = c , we can produce an equation with exactly one variable by choosing a = 0 , b = 5 , and c = 15 . The equation a x + b y = c then becomes

0 x + 5 y = 15

Since 0 ( any number ) = 0 , the term 0 x is 0 for any number that is chosen for x .

Thus,

0 x + 5 y = 15

becomes

0 + 5 y = 15

But, 0 is the additive identity and 0 + 5 y = 5 y .

5 y = 15

Then, solving for y we get

y = 3

This is an equation in which exactly one variable appears.

This means that regardless of which number we choose for x , the corresponding y -value is 3. Since the y -value is always the same as we move from left-to-right through the x -values , the height of the line above the x -axis is always the same (in this case, 3 units). This type of line must be horizontal.

An argument similar to the one above will show that if the only variable that appears is x , we can expect to get a vertical line.

Sample set c

Graph y = 4 .
The only variable appearing is y . Regardless of which x -value we choose, the y -value is always 4. All points with a y -value of 4 satisfy the equation. Thus we get a horizontal line 4 unit above the x -axis .

x y ( x , y )
3 4 ( 3 , 4 )
2 4 ( 2 , 4 )
1 4 ( 1 , 4 )
0 4 ( 0 , 4 )
1 4 ( 1 , 4 )
2 4 ( 2 , 4 )
3 4 ( 3 , 4 )
4 4 ( 4 , 4 )

A graph of a line parallel to x-axis passing through a point with coordinates zero, four.

Got questions? Get instant answers now!

Graph x = 2 .
The only variable that appears is x . Regardless of which y -value we choose, the x -value will always be 2 . Thus, we get a vertical line two units to the left of the y -axis .

x y ( x , y )
2 4 ( 2 , 4 )
2 3 ( 2 , 3 )
2 2 ( 2 , 2 )
2 1 ( 2 , 1 )
2 0 ( 2 , 0 )
2 1 ( 2 , 1 )
2 2 ( 2 , 0 )
2 3 ( 2 , 3 )
2 4 ( 2 , 4 )
  • A graph of a line parallel to y-axis and passing through a point with coordinates negative two, zero.
Got questions? Get instant answers now!

Practice set c

    Summarizing our results we can make the following observations:

  1. When a linear equation in two variables is written in the form a x + b y = c , we say it is written in general form .
  2. To graph an equation in general form it is sometimes convenient to use the intercept method.
  3. A linear equation in which both variables appear will graph as a slanted line.
  4. A linear equation in which only one variable appears will graph as either a vertical or horizontal line.

    x = a graphs as a vertical line passing through a on the x -axis .
    y = b graphs as a horizontal line passing through b on the y -axis .

Exercises

For the following problems, graph the equations.

Construct the graph of all the points that have coordinates ( a , a ) , that is, for each point, the x and y -values are the same.
An xy coordinate plane with gridlines, labeled negative five and five on the both axes.

Got questions? Get instant answers now!

Use a calculator Calculator problems

626.01 x 506.73 y = 2443.50
An xy coordinate plane with gridlines, labeled negative five and five on the both axes.

Got questions? Get instant answers now!

Exercises for review

( [link] ) Name the property of real numbers that makes 4 + x = x + 4 a true statement.

commutative property of addition

Got questions? Get instant answers now!

( [link] ) Supply the missing word. The absolute value of a number a , denoted | a | , is the from a to 0 on the number line.

Got questions? Get instant answers now!

( [link] ) Find the product ( 3 x + 2 ) ( x 7 ) .

3 x 2 19 x 14

Got questions? Get instant answers now!

( [link] ) Solve the equation 3 [ 3 ( x 2 ) + 4 x ] 24 = 0 .

Got questions? Get instant answers now!

( [link] ) Supply the missing word. The coordinate axes divide the plane into four equal regions called .

quadrants

Got questions? Get instant answers now!

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Elementary algebra. OpenStax CNX. May 08, 2009 Download for free at http://cnx.org/content/col10614/1.3
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Elementary algebra' conversation and receive update notifications?

Ask