# 15.8 Orthonormal basis expansions

 Page 1 / 1
The module looks at decomposing signals through orthonormal basis expansion to provide an alternative representation. The module presents many examples of solving these problems and looks at them in several spaces and dimensions.

## Main idea

When working with signals many times it is helpful to break up a signal into smaller, more manageable parts. Hopefully bynow you have been exposed to the concept of eigenvectors and there use in decomposing a signal into one of its possible basis.By doing this we are able to simplify our calculations of signals and systems through eigenfunctions of LTI systems .

Now we would like to look at an alternative way to represent signals, through the use of orthonormal basis . We can think of orthonormal basis as a set of building blockswe use to construct functions. We will build up the signal/vector as a weighted sum of basis elements.

The complex sinusoids $\frac{1}{\sqrt{T}}e^{i{\omega }_{0}nt}$ for all $()$ n form an orthonormal basis for ${L}^{2}(\left[0 , T\right]())$ .

In our Fourier series equation, $f(t)=\sum_{n=()}$ c n ω 0 n t , the $\{{c}_{n}\}()$ are just another representation of $f(t)$ .

For signals/vectors in a Hilbert Space , the expansion coefficients are easy to find.

## Alternate representation

Recall our definition of a basis : A set of vectors $\{{b}_{i}\}$ in a vector space $S$ is a basis if

1. The ${b}_{i}$ are linearly independent.
2. The ${b}_{i}$ span $S$ . That is, we can find $\{{\alpha }_{i}\}$ , where ${\alpha }_{i}\in \mathbb{C}$ (scalars) such that
$\forall x, x\in S\colon x=\sum {\alpha }_{i}{b}_{i}$
where $x$ is a vector in $S$ , $\alpha$ is a scalar in $\mathbb{C}$ , and $b$ is a vector in $S$ .

Condition 2 in the above definition says we can decompose any vector in terms of the $\{{b}_{i}\}$ . Condition 1 ensures that the decomposition is unique (think about this at home).

The $\{{\alpha }_{i}\}$ provide an alternate representation of $x$ .

Let us look at simple example in ${ℝ}^{2}$ , where we have the following vector: $x=\left(\begin{array}{c}1\\ 2\end{array}\right)()$ Standard Basis: $\{{e}_{0}, {e}_{1}\}()=\{\left(\begin{array}{c}1\\ 0\end{array}\right), \left(\begin{array}{c}0\\ 1\end{array}\right)\}()$ $x={e}_{0}+2{e}_{1}$ Alternate Basis: $\{{h}_{0}, {h}_{1}\}()=\{\left(\begin{array}{c}1\\ 1\end{array}\right), \left(\begin{array}{c}1\\ -1\end{array}\right)\}()$ $x=\frac{3}{2}{h}_{0}+\frac{-1}{2}{h}_{1}$

In general, given a basis $\{{b}_{0}, {b}_{1}\}()$ and a vector $x\in {ℝ}^{2}$ , how do we find the ${\alpha }_{0}$ and ${\alpha }_{1}$ such that

$x={\alpha }_{0}{b}_{0}+{\alpha }_{1}{b}_{1}$

## Finding the coefficients

Now let us address the question posed above about finding ${\alpha }_{i}$ 's in general for ${ℝ}^{2}$ . We start by rewriting [link] so that we can stack our ${b}_{i}$ 's as columns in a 2×2 matrix.

$\begin{pmatrix}x\\ \end{pmatrix}={\alpha }_{0}\begin{pmatrix}{b}_{0}\\ \end{pmatrix}+{\alpha }_{1}\begin{pmatrix}{b}_{1}\\ \end{pmatrix}$
$\begin{pmatrix}x\\ \end{pmatrix}=\begin{pmatrix}⋮ & ⋮\\ {b}_{0} & {b}_{1}\\ ⋮ & ⋮\\ \end{pmatrix}\begin{pmatrix}{\alpha }_{0}\\ {\alpha }_{1}\\ \end{pmatrix}$

Here is a simple example, which shows a little more detail about the above equations.

$\begin{pmatrix}x(0)\\ x(1)\\ \end{pmatrix}={\alpha }_{0}\begin{pmatrix}{b}_{0}(0)\\ {b}_{0}(1)\\ \end{pmatrix}+{\alpha }_{1}\begin{pmatrix}{b}_{1}(0)\\ {b}_{1}(1)\\ \end{pmatrix}=\begin{pmatrix}{\alpha }_{0}{b}_{0}(0)+{\alpha }_{1}{b}_{1}(0)\\ {\alpha }_{0}{b}_{0}(1)+{\alpha }_{1}{b}_{1}(1)\\ \end{pmatrix}()$
$\begin{pmatrix}x(0)\\ x(1)\\ \end{pmatrix}=\begin{pmatrix}{b}_{0}(0) & {b}_{1}(0)\\ {b}_{0}(1) & {b}_{1}(1)\\ \end{pmatrix}\begin{pmatrix}{\alpha }_{0}\\ {\alpha }_{1}\\ \end{pmatrix}$

## Simplifying our equation

To make notation simpler, we define the following two itemsfrom the above equations:

• Basis Matrix : $B=\begin{pmatrix}⋮ & ⋮\\ {b}_{0} & {b}_{1}\\ ⋮ & ⋮\\ \end{pmatrix}()$
• Coefficient Vector : $\alpha =\begin{pmatrix}{\alpha }_{0}\\ {\alpha }_{1}\\ \end{pmatrix}()$
This gives us the following, concise equation:
$x=B\alpha$
which is equivalent to $x=\sum_{i=0}^{1} {\alpha }_{i}{b}_{i}$ .

Given a standard basis, $\{\begin{pmatrix}1\\ 0\\ \end{pmatrix}, \begin{pmatrix}0\\ 1\\ \end{pmatrix}\}$ , then we have the following basis matrix: $B=\begin{pmatrix}0 & 1\\ 1 & 0\\ \end{pmatrix}$

To get the ${\alpha }_{i}$ 's, we solve for the coefficient vector in [link]

$\alpha =B^{(-1)}x$
Where $B^{(-1)}$ is the inverse matrix of $B$ .

## Examples

Let us look at the standard basis first and try to calculate $\alpha$ from it. $B=\begin{pmatrix}1 & 0\\ 0 & 1\\ \end{pmatrix}=I$ Where $I$ is the identity matrix . In order to solve for $\alpha$ let us find the inverse of $B$ first (which is obviously very trivial in this case): $B^{(-1)}=\begin{pmatrix}1 & 0\\ 0 & 1\\ \end{pmatrix}$ Therefore we get, $\alpha =B^{(-1)}x=x$

Let us look at a ever-so-slightly more complicated basis of $\{\begin{pmatrix}1\\ 1\\ \end{pmatrix}, \begin{pmatrix}1\\ -1\\ \end{pmatrix}\}=\{{h}_{0}, {h}_{1}\}$ Then our basis matrix and inverse basis matrix becomes: $B=\begin{pmatrix}1 & 1\\ 1 & -1\\ \end{pmatrix}$ $B^{(-1)}=\begin{pmatrix}\frac{1}{2} & \frac{1}{2}\\ \frac{1}{2} & \frac{-1}{2}\\ \end{pmatrix}$ and for this example it is given that $x=\begin{pmatrix}3\\ 2\\ \end{pmatrix}$ Now we solve for $\alpha$ $\alpha =B^{(-1)}x=\begin{pmatrix}\frac{1}{2} & \frac{1}{2}\\ \frac{1}{2} & \frac{-1}{2}\\ \end{pmatrix}\begin{pmatrix}3\\ 2\\ \end{pmatrix}=\begin{pmatrix}2.5\\ 0.5\\ \end{pmatrix}$ and we get $x=2.5{h}_{0}+0.5{h}_{1}$

Now we are given the following basis matrix and $x$ : $\{{b}_{0}, {b}_{1}\}=\{\begin{pmatrix}1\\ 2\\ \end{pmatrix}, \begin{pmatrix}3\\ 0\\ \end{pmatrix}\}$ $x=\begin{pmatrix}3\\ 2\\ \end{pmatrix}$ For this problem, make a sketch of the bases and then represent $x$ in terms of ${b}_{0}$ and ${b}_{1}$ .

In order to represent $x$ in terms of ${b}_{0}$ and ${b}_{1}$ we will follow the same steps we used in the above example. $B=\begin{pmatrix}1 & 2\\ 3 & 0\\ \end{pmatrix}$ $B^{(-1)}=\begin{pmatrix}0 & \frac{1}{2}\\ \frac{1}{3} & \frac{-1}{6}\\ \end{pmatrix}$ $\alpha =B^{(-1)}x=\begin{pmatrix}1\\ \frac{2}{3}\\ \end{pmatrix}$ And now we can write $x$ in terms of ${b}_{0}$ and ${b}_{1}$ . $x={b}_{0}+\frac{2}{3}{b}_{1}$ And we can easily substitute in our known values of ${b}_{0}$ and ${b}_{1}$ to verify our results.

A change of basis simply looks at $x$ from a "different perspective." $B^{(-1)}$ transforms $x$ from the standard basis to our new basis, $\{{b}_{0}, {b}_{1}\}$ . Notice that this is a totally mechanical procedure.

## Extending the dimension and space

We can also extend all these ideas past just ${ℝ}^{2}$ and look at them in ${ℝ}^{n}$ and ${ℂ}^{n}$ . This procedure extends naturally to higher (>2) dimensions. Given a basis $\{{b}_{0}, {b}_{1}, \dots , {b}_{n-1}\}$ for ${ℝ}^{n}$ , we want to find $\{{\alpha }_{0}, {\alpha }_{1}, \dots , {\alpha }_{n-1}\}$ such that

$x={\alpha }_{0}{b}_{0}+{\alpha }_{1}{b}_{1}+\dots +{\alpha }_{n-1}{b}_{n-1}$
Again, we will set up a basis matrix $B=\begin{pmatrix}{b}_{0} & {b}_{1} & {b}_{2} & \dots & {b}_{n-1}\\ \end{pmatrix}()$ where the columns equal the basis vectors and it will alwaysbe an n×n matrix (although the above matrix does not appear to be square since we left terms in vector notation).We can then proceed to rewrite [link] $x=\begin{pmatrix}{b}_{0} & {b}_{1} & \dots & {b}_{n-1}\\ \end{pmatrix}\begin{pmatrix}{\alpha }_{0}\\ ⋮\\ {\alpha }_{n-1}\\ \end{pmatrix}=B\alpha$ and $\alpha =B^{(-1)}x$

what does nano mean?
nano basically means 10^(-9). nanometer is a unit to measure length.
Bharti
do you think it's worthwhile in the long term to study the effects and possibilities of nanotechnology on viral treatment?
absolutely yes
Daniel
how to know photocatalytic properties of tio2 nanoparticles...what to do now
it is a goid question and i want to know the answer as well
Maciej
Abigail
for teaching engĺish at school how nano technology help us
Anassong
Do somebody tell me a best nano engineering book for beginners?
what is fullerene does it is used to make bukky balls
are you nano engineer ?
s.
fullerene is a bucky ball aka Carbon 60 molecule. It was name by the architect Fuller. He design the geodesic dome. it resembles a soccer ball.
Tarell
what is the actual application of fullerenes nowadays?
Damian
That is a great question Damian. best way to answer that question is to Google it. there are hundreds of applications for buck minister fullerenes, from medical to aerospace. you can also find plenty of research papers that will give you great detail on the potential applications of fullerenes.
Tarell
what is the Synthesis, properties,and applications of carbon nano chemistry
Mostly, they use nano carbon for electronics and for materials to be strengthened.
Virgil
is Bucky paper clear?
CYNTHIA
so some one know about replacing silicon atom with phosphorous in semiconductors device?
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
Do you know which machine is used to that process?
s.
how to fabricate graphene ink ?
for screen printed electrodes ?
SUYASH
What is lattice structure?
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
what's the easiest and fastest way to the synthesize AgNP?
China
Cied
types of nano material
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
I'm interested in nanotube
Uday
what is nanomaterials​ and their applications of sensors.
what is nano technology
what is system testing?
preparation of nanomaterial
how did you get the value of 2000N.What calculations are needed to arrive at it
Privacy Information Security Software Version 1.1a
Good
Berger describes sociologists as concerned with
Got questions? Join the online conversation and get instant answers!