<< Chapter < Page Chapter >> Page >

An insulator is a non-conducting material that does not carry any charge. Examples of insulators would be plastic and wood. Do you understand now why electrical wires are normally covered with plastic insulation? Semi-conductors behave like insulators when they are cold, and like conductors when they are hot. The elements silicon and germanium are examples of semi-conductors.

Conductors and insulators

A conductor allows the easy movement or flow of something such as heat or electrical charge through it. Insulators are the opposite to conductors because they inhibit or reduce the flow of heat, electrical charge, sound etc through them.

Think about the materials around you. Are they electrical conductors or not? Why are different materials used? Think about the use of semiconductors in electronics? Can you think of why they are used there?

Experiment : electrical conductivity

Aim:


To investigate the electrical conductivity of a number of substances

Apparatus:


  • two or three cells
  • light bulb
  • crocodile clips
  • wire leads
  • a selection of test substances (e.g. a piece of plastic, aluminium can, metal pencil sharpener, magnet, wood, chalk).

Method:


  1. Set up the circuit as shown above, so that the test substance is held between the two crocodile clips. The wire leads should be connected to the cells and the light bulb should also be connected into the circuit.
  2. Place the test substances one by one between the crocodile clips and see what happens to the light bulb.

Results:


Record your results in the table below:
Test substance Metal/non-metal Does the light bulb glow? Conductor or insulator

Conclusions:


In the substances that were tested, the metals were able to conduct electricity and the non-metals were not. Metals are good electrical conductors and non-metals are not.

The following simulation allows you to work through the above activity. For this simulation use the grab bag option to get materials to test. Set up the circuit as described in the activity.

run demo

Thermal conductors and insulators

A thermal conductor is a material that allows energy in the form of heat, to be transferred within the material, without any movement of the material itself. An easy way to understand this concept is through a simple demonstration.

Demonstration : thermal conductivity

Aim:


To demonstrate the ability of different substances to conduct heat.

Apparatus:


You will need two cups (made from the same material e.g. plastic); a metal spoon and a plastic spoon.

Method:

  • Pour boiling water into the two cups so that they are about half full.
  • At the same time, place a metal spoon into one cup and a plastic spoon in the other.
  • Note which spoon heats up more quickly

Results:


The metal spoon heats up faster than the plastic spoon. In other words, the metal conducts heat well, but the plastic does not.

Conclusion:

Metal is a good thermal conductor, while plastic is a poor thermal conductor. This explains why cooking pots are metal, but their handles are often plastic or wooden. The pot itself must be metal so that heat from the cooking surface can heat up the pot to cook the food inside it, but the handle is made from a poor thermal conductor so that the heat does not burn the hand of the person who is cooking.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Chemistry grade 10 [caps]. OpenStax CNX. Jun 13, 2011 Download for free at http://cnx.org/content/col11303/1.4
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Chemistry grade 10 [caps]' conversation and receive update notifications?

Ask