<< Chapter < Page Chapter >> Page >
Create a Code Composer Studio v4 C project.

Introduction

This module describes how to create a Code Composer Studio (CCS) project that executes a simple C program. The project does not use DSP/BIOS and runs on the CCS simulator. The code will be a simple "hello world" program. In this project the processor used is the TMS320C67xx but the process works for other processors as well.

Create a ccs project

To create a CCS project select File->New->CCS Project .

Screenshot of CCS Project menu

This will bring up a window where you can enter the name of the project. The location selected is the default location for project files. Press Next .

CCS Project name and location

Since the example uses the TMS320C67xx processor the project type selected is C6000 . The project configurations are Debug and Release . Select the Next button.

Type of CCS project

If there are any project dependencies they are selected on the next screen. Select the Next button.

CCS Project dependencies

On the Project Settings Screen , select the items that pertain to the type of project to be created. Since the project will be executed select Output Type: Executable . The processor type is TMS320C67xx so the Device Variant is Generic C67xx Device . This project will use Little Endian . The code generation tools are the latest version (in this case TI v7.0.3). The runtime support library is selected to match the device variant and the endianness selected. The library can be selected automatically. Press Next .

CCS project settings

Since this project will be a simple C program project, select either the Empty Project or the Hello World example.

After the projects settings have been set, select Finish and the project will show up in the C/C++ Projects view.

C/C++ projects view

Add code files

Projects in CCS must have a main function. This function gets executed first by default. So create a program file that contains a main function. Select File->New->Source File .

New source file

The New Source File dialog opens and you can enter the source file name. Add a .c extension for a C program file. The source folder should be the folder of your project. Select Finish and a new file is opened.

New source file dialog

Enter the C code. The file must contain a main function. After entering the code, save the file.

Code in main.c

Create a target configuration

In order to build and run your project you need to have a target configuration. This file will contain information about the emulator that will be used and the target processor. In this module the target configuration will be the TI simulator for the C6713 processor.

First select File->New->Target Configuration File .

Open new target configuration file

In the New Target Configuration dialog enter the configuration file name ending in the .ccxml file extension. Put the file in the project directory. Select Finish and a new target configuration file opens.

Target configuration dialog

In the configuration, select the connection needed (simulator or some type of emulator, etc.) and the type of device. In this example the TI simulator is used with the C6713 little endian simulator device. Select Save when done.

Target configuration setup

Now the target configuration is in the project.

Project files

Debug the project

The default project settings do not have the stack and heap sizes defined. This will produce warnings when building the project. To change the project properties, select Project->Properties and then click on C/C++ Build on the left and the C6000 Linker/Basic Options under Tool Settings . For the stack size and heap size enter 0x400 and click OK .

Setting the stack and heap sizes

To start a debug session either select Target->Debug Active Project or press the debug icon in the menu bar.

Debug icon

When the debug session starts the code files are compiled and linked into an executable file and the file is loaded onto the target. The initialization code is executed and the program is halted at the beginning of the main function.

Debugging session

Icons on the debug window can be used to run the program and other debugging tools.

Debugging tools

Press the green arrow to run the program. The main function will be executed and the program will leave the main function. In the program the printf function prints to the console which if not shown by default can be viewed by selecting View->Console . In the console is shown the "hello world" that was printed.

Console output of the program

Questions & Answers

Do somebody tell me a best nano engineering book for beginners?
s. Reply
what is fullerene does it is used to make bukky balls
Devang Reply
are you nano engineer ?
s.
what is the Synthesis, properties,and applications of carbon nano chemistry
Abhijith Reply
so some one know about replacing silicon atom with phosphorous in semiconductors device?
s. Reply
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
how to fabricate graphene ink ?
SUYASH Reply
for screen printed electrodes ?
SUYASH
What is lattice structure?
s. Reply
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
Sanket Reply
what's the easiest and fastest way to the synthesize AgNP?
Damian Reply
China
Cied
types of nano material
abeetha Reply
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
I'm interested in nanotube
Uday
what is nanomaterials​ and their applications of sensors.
Ramkumar Reply
what is nano technology
Sravani Reply
what is system testing?
AMJAD
preparation of nanomaterial
Victor Reply
Yes, Nanotechnology has a very fast field of applications and their is always something new to do with it...
Himanshu Reply
good afternoon madam
AMJAD
what is system testing
AMJAD
what is the application of nanotechnology?
Stotaw
In this morden time nanotechnology used in many field . 1-Electronics-manufacturad IC ,RAM,MRAM,solar panel etc 2-Helth and Medical-Nanomedicine,Drug Dilivery for cancer treatment etc 3- Atomobile -MEMS, Coating on car etc. and may other field for details you can check at Google
Azam
anybody can imagine what will be happen after 100 years from now in nano tech world
Prasenjit
after 100 year this will be not nanotechnology maybe this technology name will be change . maybe aftet 100 year . we work on electron lable practically about its properties and behaviour by the different instruments
Azam
name doesn't matter , whatever it will be change... I'm taking about effect on circumstances of the microscopic world
Prasenjit
how hard could it be to apply nanotechnology against viral infections such HIV or Ebola?
Damian
silver nanoparticles could handle the job?
Damian
not now but maybe in future only AgNP maybe any other nanomaterials
Azam
Hello
Uday
I'm interested in Nanotube
Uday
this technology will not going on for the long time , so I'm thinking about femtotechnology 10^-15
Prasenjit
can nanotechnology change the direction of the face of the world
Prasenjit Reply
At high concentrations (>0.01 M), the relation between absorptivity coefficient and absorbance is no longer linear. This is due to the electrostatic interactions between the quantum dots in close proximity. If the concentration of the solution is high, another effect that is seen is the scattering of light from the large number of quantum dots. This assumption only works at low concentrations of the analyte. Presence of stray light.
Ali Reply
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
Berger describes sociologists as concerned with
Mueller Reply
Got questions? Join the online conversation and get instant answers!
QuizOver.com Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, Dsp lab with ti c6x dsp and c6713 dsk. OpenStax CNX. Feb 18, 2013 Download for free at http://cnx.org/content/col11264/1.6
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Dsp lab with ti c6x dsp and c6713 dsk' conversation and receive update notifications?

Ask