<< Chapter < Page Chapter >> Page >
View of an airplane with an inset of the passengers sitting inside. A passenger has just moved from his seat and is now standing in the back. His initial position was 6 point 0 meters. His final position is 2 point 0 meters. His displacement is given by the equation delta x equals x sub f minus x sub 0 equals 4 point zero meters.
A passenger moves from his seat to the back of the plane. His location relative to the airplane is given by x size 12{x} {} . The −4 m displacement of the passenger relative to the plane is represented by an arrow toward the rear of the plane. Notice that the arrow representing his displacement is twice as long as the arrow representing the displacement of the professor (he moves twice as far) in [link] .

Note that displacement has a direction as well as a magnitude. The professor's displacement is 2.0 m to the right, and the airline passenger's displacement is 4.0 m toward the rear. In one-dimensional motion, direction can be specified with a plus or minus sign. When you begin a problem, you should select which direction is positive (usually that will be to the right or up, but you are free to select positive as being any direction). The professor's initial position is x 0 = 1 . 5 m size 12{x rSub { size 8{0} } =1 "." 5`m} {} and her final position is x f = 3 . 5 m size 12{x rSub { size 8{f} } =3 "." 5`m} {} . Thus her displacement is

Δ x = x f x 0 = 3 .5 m 1.5 m = + 2 .0 m . size 12{Δx=x"" lSub { size 8{f} } - x rSub { size 8{0} } =3 "." 5`m - 1 "." 5`"m "= +2 "." "0 m"} {}

In this coordinate system, motion to the right is positive, whereas motion to the left is negative. Similarly, the airplane passenger's initial position is x 0 = 6 . 0 m and his final position is x f = 2 . 0 m size 12{x rSub { size 8{f} } =2 "." 0`m} {} , so his displacement is

Δ x = x f x 0 = 2 . 0 m 6 . 0 m = 4 . 0 m . size 12{Δx=x"" lSub { size 8{f} } - x rSub { size 8{0} } =2 "." 0`m - 6 "." 0`m= - 4 "." 0`m} {}

His displacement is negative because his motion is toward the rear of the plane, or in the negative x size 12{x} {} direction in our coordinate system.

Distance

Although displacement is described in terms of direction, distance is not. Distance is defined to be the magnitude or size of displacement between two positions . Note that the distance between two positions is not the same as the distance traveled between them. Distance traveled is the total length of the path traveled between two positions . Distance has no direction and, thus, no sign. For example, the distance the professor walks is 2.0 m. The distance the airplane passenger walks is 4.0 m.

Misconception alert: distance traveled vs. magnitude of displacement

It is important to note that the distance traveled , however, can be greater than the magnitude of the displacement (by magnitude, we mean just the size of the displacement without regard to its direction; that is, just a number with a unit). For example, the professor could pace back and forth many times, perhaps walking a distance of 150 m during a lecture, yet still end up only 2.0 m to the right of her starting point. In this case her displacement would be +2.0 m, the magnitude of her displacement would be 2.0 m, but the distance she traveled would be 150 m. In kinematics we nearly always deal with displacement and magnitude of displacement, and almost never with distance traveled. One way to think about this is to assume you marked the start of the motion and the end of the motion. The displacement is simply the difference in the position of the two marks and is independent of the path taken in traveling between the two marks. The distance traveled, however, is the total length of the path taken between the two marks.

A cyclist rides 3 km west and then turns around and rides 2 km east. (a) What is her displacement? (b) What distance does she ride? (c) What is the magnitude of her displacement?

Two diagrams side by side. To the left is a horizontal line, or x axis, with points for final position and initial position. Displacement 1, shown by an arrow pointing leftward, equals negative 3 kilometers. Displacement 2, shown by an arrow pointing rightward, equals 2 kilometers. To the right is a pair of x and y axes, showing that east is the positive x direction and west is the negative x direction.

(a) The rider's displacement is Δ x = x f x 0 = −1 km . (The displacement is negative because we take east to be positive and west to be negative.)

(b) The distance traveled is 3 km + 2 km = 5 km size 12{"3 km "+" 2 km "=" 5 km"} {} .

(c) The magnitude of the displacement is 1 km size 12{1" km"} {} .

Got questions? Get instant answers now!

Section summary

  • Kinematics is the study of motion without considering its causes. In this chapter, it is limited to motion along a straight line, called one-dimensional motion.
  • Displacement is the change in position of an object.
  • In symbols, displacement Δ x is defined to be
    Δ x = x f x 0 ,
    where x 0 is the initial position and x f is the final position. In this text, the Greek letter Δ (delta) always means “change in” whatever quantity follows it. The SI unit for displacement is the meter (m). Displacement has a direction as well as a magnitude.
  • When you start a problem, assign which direction will be positive.
  • Distance is the magnitude of displacement between two positions.
  • Distance traveled is the total length of the path traveled between two positions.

Conceptual questions

Give an example in which there are clear distinctions among distance traveled, displacement, and magnitude of displacement. Specifically identify each quantity in your example.

Got questions? Get instant answers now!

Under what circumstances does distance traveled equal magnitude of displacement? What is the only case in which magnitude of displacement and displacement are exactly the same?

Got questions? Get instant answers now!

Bacteria move back and forth by using their flagella (structures that look like little tails). Speeds of up to 50 μm/s 50 × 10 6 m/s size 12{"50 μm/s " left ("50" times "10" rSup { size 8{ - 6} } " m/s" right )} {} have been observed. The total distance traveled by a bacterium is large for its size, while its displacement is small. Why is this?

Got questions? Get instant answers now!

Problems&Exercises

An x axis starts at 0 meters and ends at 12 meters. There are four points on the graph with displacement paths. Path A starts at 0 and stops at 7. Path B starts at 12 and ends at 7. Path C starts at 2, goes to 10, turns around and goes back to 8, then turns around again and stops at 11. Path D starts at 9, goes to 3, then turns around and stops at 5.

Find the following for path A in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

(a) 7 m

(b) 7 m

(c) + 7 m size 12{+7`m} {}

Got questions? Get instant answers now!

Find the following for path B in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

Got questions? Get instant answers now!

Find the following for path C in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

(a) 13 m

(b) 9 m

(c) + 9 m size 12{+9`m} {}

Got questions? Get instant answers now!

Find the following for path D in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

Got questions? Get instant answers now!

Test prep for ap courses

Which of the following statements comparing position, distance, and displacement is correct?

  1. An object may record a distance of zero while recording a non-zero displacement.
  2. An object may record a non-zero distance while recording a displacement of zero.
  3. An object may record a non-zero distance while maintaining a position of zero.
  4. An object may record a non-zero displacement while maintaining a position of zero.

(b)

Got questions? Get instant answers now!

Questions & Answers

What is meant by dielectric charge?
It's Reply
what happens to the size of charge if the dielectric is changed?
Brhanu Reply
omega= omega not +alpha t derivation
Provakar Reply
u have to derivate it respected to time ...and as w is the angular velocity uu will relace it with "thita × time""
Abrar
do to be peaceful with any body
Brhanu Reply
the angle subtended at the center of sphere of radius r in steradian is equal to 4 pi how?
Saeed Reply
if for diatonic gas Cv =5R/2 then gamma is equal to 7/5 how?
Saeed
define variable velocity
Ali Reply
displacement in easy way.
Mubashir Reply
binding energy per nucleon
Poonam Reply
why God created humanity
Manuel Reply
Because HE needs someone to dominate the earth (Gen. 1:26)
Olorunfemi
why god made humenity
Ali
Is the object in a conductor or an insulator? Justify your answer. whats the answer to this question? pls need help figure is given above
Jun Reply
ok we can say body is electrically neutral ...conductor this quality is given to most metalls who have free electron in orbital d ...but human doesn't have ...so we re made from insulator or dielectric material ... furthermore, the menirals in our body like k, Fe , cu , zn
Abrar
when we face electric shock these elements work as a conductor that's why we got this shock
Abrar
how do i calculate the pressure on the base of a deposit if the deposit is moving with a linear aceleration
ximena Reply
why electromagnetic induction is not used in room heater ?
Gopi Reply
room?
Abrar
What is position?
Amoah Reply
What is law of gravition
sushil Reply
what is magnetism
Sandeep Reply
Practice Key Terms 5

Get the best College physics for ap... course in your pocket!





Source:  OpenStax, College physics for ap® courses. OpenStax CNX. Nov 04, 2016 Download for free at https://legacy.cnx.org/content/col11844/1.14
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics for ap® courses' conversation and receive update notifications?

Ask