<< Chapter < Page Chapter >> Page >
In this module, a physical model of vehicle engine management will be created. The model will be first simulated, and then used to create an implementation on the eZDSP-F2812. This board will emulate in real-time the behavior of a vehicle, under various stimuli. In this example, the environment is used to build a physical model of vehicle engine management in simulation, which is then used to create an implementation on the eZDSP-F2812. This board will emulate in real-time the behavior of a vehicle, under various stimuli.

Introduction

The Texas Instruments C28x family of processors has been designed to implement control applications, for example digital motor control and un-interruptible power supplies. We shall start here with a simple application. In this Laboratory, you will build a simulation model of a vehicle dynamics using Simulink, and then emulate it using the eZDSP-F2812 board.

Objectives

  • Design a Simulink model of the motion of a vehicle.
  • Run the model using Simulink on a PC.
  • Modify the model for use with the Texas Instruments C28x Digital Signal Processor.
  • Run the modified model on the Texas Instruments F2812 ezDSP.

Level

Beginner; This is intended as the first complete project using Matlab and Simulink.

It is suitable for students who have only limited exposure to Texas Instruments DSPs before.

Requirements

In developing this Laboratory, the following hardware and software were used:

  • Matlab R2006b with Embedded Target for TI C2000.
  • Code Composer Studio (CCS) 3.1.
  • Spectrum Digital ezDSP F2812 Hardware
  • Some external electronic components costing about $2.

Simulation

Running the vehicle dynamics simulation

Open VehicleDynamics.mdl .

Engine Management Subsystem

Run the Model.

The input to the model is a ramp generator, which simulates smooth acceleration.

You will see the graphs of Horsepower and Vehicle Speed.

Changing the vehicle mass

Double click on the “Vehicle Dynamics” block. This models the equation of motion using Simulink Blocks.

Vehicle Dynamics

At present, the vehicle mass is 8000 kg.

We will now simulate a small compact car. Change the 1/m gain block to 1/1000 and change the b/m block to 2/1000.

Run the model again and notice the effect on maximum vehicle speed and how long it takes to reach maximum vehicle speed

You might also like to simulate a 35,000 kg lorry. Change the 1/m block to 1/35000 and b/m to 10/35000.

Changing the engine power profile

Double click on the “Engine Management” block. This models the gas in – horsepower out function of the engine.

Engine Management Subsystem

Double-click on the Power Transfer Function

Engine Power Transfer Function

Change the shape of the Power Transfer Function. You may wish to change the gradient or make the plateau wider. Run the model.

Other modifications to the model

Go to the Website of an automobile manufacture, and obtain the actual engine power transfer function for a real car. Run this in the model.

Questions & Answers

how to know photocatalytic properties of tio2 nanoparticles...what to do now
Akash Reply
it is a goid question and i want to know the answer as well
Maciej
Do somebody tell me a best nano engineering book for beginners?
s. Reply
what is fullerene does it is used to make bukky balls
Devang Reply
are you nano engineer ?
s.
fullerene is a bucky ball aka Carbon 60 molecule. It was name by the architect Fuller. He design the geodesic dome. it resembles a soccer ball.
Tarell
what is the actual application of fullerenes nowadays?
Damian
That is a great question Damian. best way to answer that question is to Google it. there are hundreds of applications for buck minister fullerenes, from medical to aerospace. you can also find plenty of research papers that will give you great detail on the potential applications of fullerenes.
Tarell
what is the Synthesis, properties,and applications of carbon nano chemistry
Abhijith Reply
Mostly, they use nano carbon for electronics and for materials to be strengthened.
Virgil
is Bucky paper clear?
CYNTHIA
so some one know about replacing silicon atom with phosphorous in semiconductors device?
s. Reply
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
Do you know which machine is used to that process?
s.
how to fabricate graphene ink ?
SUYASH Reply
for screen printed electrodes ?
SUYASH
What is lattice structure?
s. Reply
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
Sanket Reply
what's the easiest and fastest way to the synthesize AgNP?
Damian Reply
China
Cied
types of nano material
abeetha Reply
I start with an easy one. carbon nanotubes woven into a long filament like a string
Porter
many many of nanotubes
Porter
what is the k.e before it land
Yasmin
what is the function of carbon nanotubes?
Cesar
I'm interested in nanotube
Uday
what is nanomaterials​ and their applications of sensors.
Ramkumar Reply
what is nano technology
Sravani Reply
what is system testing?
AMJAD
preparation of nanomaterial
Victor Reply
Yes, Nanotechnology has a very fast field of applications and their is always something new to do with it...
Himanshu Reply
good afternoon madam
AMJAD
what is system testing
AMJAD
what is the application of nanotechnology?
Stotaw
In this morden time nanotechnology used in many field . 1-Electronics-manufacturad IC ,RAM,MRAM,solar panel etc 2-Helth and Medical-Nanomedicine,Drug Dilivery for cancer treatment etc 3- Atomobile -MEMS, Coating on car etc. and may other field for details you can check at Google
Azam
anybody can imagine what will be happen after 100 years from now in nano tech world
Prasenjit
after 100 year this will be not nanotechnology maybe this technology name will be change . maybe aftet 100 year . we work on electron lable practically about its properties and behaviour by the different instruments
Azam
name doesn't matter , whatever it will be change... I'm taking about effect on circumstances of the microscopic world
Prasenjit
how hard could it be to apply nanotechnology against viral infections such HIV or Ebola?
Damian
silver nanoparticles could handle the job?
Damian
not now but maybe in future only AgNP maybe any other nanomaterials
Azam
Hello
Uday
I'm interested in Nanotube
Uday
this technology will not going on for the long time , so I'm thinking about femtotechnology 10^-15
Prasenjit
can nanotechnology change the direction of the face of the world
Prasenjit Reply
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
Got questions? Join the online conversation and get instant answers!
QuizOver.com Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, From matlab and simulink to real-time with ti dsp's. OpenStax CNX. Jun 08, 2009 Download for free at http://cnx.org/content/col10713/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'From matlab and simulink to real-time with ti dsp's' conversation and receive update notifications?

Ask